Differences

This shows you the differences between two versions of the page.

--- mini_drill_press [2020/10/08 16:34] – [About] furst
+++ mini_drill_press [2020/10/08 16:41] (current) – [Safety Concerns] furst
@@ Line 26: / Line 26: @@
+[[Drill Press SOP]]
 -----
 ===== Detailed Specifications =====
+  * 1/7 HP DC motor
+  * 1000-30,000 RPM variable speed control
+  * Capable of drilling .002" to 5/32"
+  * Spindle run out within .0002"
+  * 4" X 4" work table
+  * J0 spindle taper
 -----
 ===== Safety Concerns =====
+  * Safety glasses, close toe shoes, and long pants must be warn when operating the machine
+  * Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
+  * Do not inhale any fumes resulting from drilling using oil
+  * Do NOT wear gloves during operation of machine
+  * Do not touch tool or spindle until the machine has stopped completely
 ----
@@ Line 41: / Line 51: @@
 ===== Reference Documentation =====
+  * {{ :tools:microdrillpress:drill-press-instructions-2.pdf |}}
+  * {{ :tools:microdrillpress:control-manual.pdf |}}
 -----