Differences

This shows you the differences between two versions of the page.

--- wen_drill_press [2020/07/23 17:36] – [About] furst
+++ wen_drill_press [2020/10/08 16:41] (current) – [Safety Concerns] furst
@@ Line 24: / Line 24: @@
 ===== Detailed Specifications =====
-Table Size:
+  * Spindle Speed Range: 280-3,100 RPM (740-3,100 on main pulley)
+  * Quill extension length: 4 3/8"
+  * Max Drill Bit Diameter:16 mm
+  * Max Work piece Height: 44"
 ----
 ===== Safety Concerns =====
-Insert Text Here!
+  * Safety glasses, close toe shoes, and long pants must be warn when operating the machine
+  * Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
+  * Do not inhale any fumes resulting from drilling using oil
+  * Do NOT wear gloves during operation of machine
+  * Do not touch tool or spindle until the machine has stopped completely
 ----
@@ Line 48: / Line 56: @@
 ===== Training Documentation =====
-{{:tools:precisionsmillingmachine:drill_press_sop.docx|}}
+[[Drill Press SOP]]
 ----