====== Mini Drill Press ======


^                     Mini Drill Press           ^
|                            {{:tools:microdrillpress:134.380_zoom.jpg?200|}}                                           |
| **Tool Type:**                  "Drilling Tool"                           |
| **Location:**                   "Innovations Workshop"                           |


|  **Supervisor**        |  **Tool Lead**  |     
|  David Bothman         |    |
|  (805) 893-4125        |    |
|  bothman@cnsi.ucsb.edu  |    |

| **Description:**                "Drilling Press"                           |
| **Manufacturer:**               "Cameron"                           |

----

===== About =====
Micro drill press for use with small tools and drill bits on precision or fine work pieces. Features an unlimited speed control motor with high torque at low RPM. 

----

=====Training=====


[[Drill Press SOP]]

-----

===== Detailed Specifications =====
  * 1/7 HP DC motor
  * 1000-30,000 RPM variable speed control
  * Capable of drilling .002" to 5/32"
  * Spindle run out within .0002"
  * 4" X 4" work table
  * J0 spindle taper

-----

===== Safety Concerns =====
  * Safety glasses, close toe shoes, and long pants must be warn when operating the machine
  * Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
  * Do not inhale any fumes resulting from drilling using oil
  * Do NOT wear gloves during operation of machine
  * Do not touch tool or spindle until the machine has stopped completely 

----


===== Reference Documentation =====
  * {{ :tools:microdrillpress:drill-press-instructions-2.pdf |}}
  * {{ :tools:microdrillpress:control-manual.pdf |}}

-----