Table of Contents
Diamond Saw
| Diamond Saw |
|---|
 |
| Tool Type: “Cutting Tool” |
| Location: “Microfluidics Lab” |
| Supervisor | Tool Lead |
| David Bothman | |
| (805) 893-4125 | |
| bothman@cnsi.ucsb.edu |
| Description: “Trim Saw 2” |
| Manufacturer: “Allied” |
About
The Trimsaw 2 is a saw designed for rapid sectioning of printed circuit boards, ceramic substrates and other abrasive non metals. Contains a built in reservoir which can be used to feed lubrication directly to the blade.
Training
Detailed Specifications
Motor power: .25 HP Speed range: 500-3000 RPM by 100 RPM increments Cutting platform: 6.75“ x 12.5” Blade size: 4“-6”
Safety Concerns
- Keep hands clear of blade when machine is on
- Use only approved blades and do not cut metals with sectioning blades
- Use coolant or lubrication when making cuts
- Use fixtures and guides whenever possible to reduce risk of slipping into the blade