Differences

This shows you the differences between two versions of the page.

--- f270_sop [2020/08/27 16:43] – [Post Processing] furst
+++ f270_sop [2020/08/27 16:45] (current) – [Maintenance Schedule (see user maintenance page 80):] furst
@@ Line 145: / Line 145: @@
   * Build tray should be scraped clean and free of any support or build material then placed in the USED F270 tray drawer if printable space is left. Any material protruding from the build tray will damage print heads during the next print.
-====Maintenance====
+====Maintenance Schedule (see user maintenance page 80):====
-  * Bed should be cleaned with IPA between prints
+  * Clean oven chamber weekly
-  * Print heads and silicone head protector should be cleaned as needed
+  * Clean platen weekly
-  * Filament should be dried before use if printer has been idle for several weeks
+  * Inspect, wipe, and clean tip wipe assemblies monthly
-  * Bed leveling should be completed every time print cores are swapped
+  * Clean exterior of printer as needed
-  * Print cores should be swapped  or purged after clog or to change print line width. Used print heads should be kept for spare parts
+  * Clean touchscreen as needed
 -----