NSF BioPACIFIC MIP Wiki

A National User Facility Dedicated to Biomaterials

User Tools

Site Tools

Trace:
laser_cutting_data

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
laser_cutting_data [2014/07/16 21:17] – kiralaser_cutting_data [2020/02/06 23:28] (current) – [Guideline Cutting Recipes] perkins
Line 28: Line 28:
  
 ---- ----
 +Gore Teflon Foam 1/16"
 +15% power, 0.5% speed, 1000 Hz (DB 7/9/15)
 +
 +Silicone Rubber sheet, 1/8"
 +100% power, 0.1% speed, 2000 Hz - use Nitrogen gas (DB 7/9/15)
 +====Guideline Cutting Recipes====
 +
 +
 +===Acrylic===
 +
 +  - 1/8 acrylic
 +
 +|         ^ Color        ^ Power         ^ Speed  ^ PPI/Hz   ^ Passes  ^Air Assist   ^ Correction  ^ Z-Offset ^
 +^ Engrave    | Black          | 25        |20  |PPI |-  | on | 0  | 0 |
 +^ Cut        | Red | 25        |0.4 |Hz  | 1 | on | 10 | 0 |
 +^ Cut        | Blue          | 100       |0.4 |PPI | 1 | on | 10 | 0 |
 +   *Recipe from Dave
 +
 +  -1/10 acrylic
 +
 +|         ^ Color        ^ Power         ^ Speed  ^ PPI/Hz   ^ Passes  ^Air Assist   ^ Correction  ^ Z-Offset ^
 +^ Skip   | Black          | -        |-  |- |-  | on | -  | - |
 +^ Cut        | Red | 2        |0.1 |Hz  | 1 | Hz | 1 | 0 |
 +^ Cut        | Blue          | 15      |0.5 |Hz | 5 | Gas 1 | 0 | 0 |
 +   *Recipe from Vincent
 +
 +
 +
 +
 +|         ^ Color        ^ Power         ^ Speed  ^ PPI/Hz   ^ Passes  ^Air Assist   ^ Correction  ^ Z-Offset ^
 +^ Engrave    | Row 1 Col 2          | Row 1 Col 3        |
 +^ Cut        | no colspan this time |                    |
 +^ Cut        | Row 2 Col 2          | Row 2 Col 3        |
 +
 +   *Recipes from Vincent
 +
 +|              ^ Heading 1            ^ Heading 2          ^
 +^ Heading 3    | Row 1 Col 2          | Row 1 Col 3        |
 +^ Heading 4    | no colspan this time |                    |
 +^ Heading 5    | Row 2 Col 2          | Row 2 Col 3        |
 +
 +   *Recipes from Rachel
 +
 +|              ^ Heading 1            ^ Heading 2          ^
 +^ Heading 3    | Row 1 Col 2          | Row 1 Col 3        |
 +^ Heading 4    | no colspan this time |                    |
 +^ Heading 5    | Row 2 Col 2          | Row 2 Col 3        |
 +
 +
 +   *Recipes from Ola
 +
 +|              ^ Heading 1            ^ Heading 2          ^
 +^ Heading 3    | Row 1 Col 2          | Row 1 Col 3        |
 +^ Heading 4    | no colspan this time |                    |
 +^ Heading 5    | Row 2 Col 2          | Row 2 Col 3        |
 +
 +
 +   *Recipes from Beach
 +
 +----
 +
 +Scribing microscope slides for breaking -Dave Bothman - 16 Dec. 2015
 +  * Recipe: 100% power, 3% speed, 1000 Hz, 1 pass
 +  * Focus on top of slide
 +  * Place a paper towel wetted with water on glass in area to be cut
 +  * Cut through the paper
 +  * Break on scribed line
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
laser_cutting_data.1405545452.txt.gz · Last modified: 2014/07/16 21:17 by kira