mono1_printer
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| mono1_printer [2021/06/16 22:13] – created jmuruena | mono1_printer [2024/10/10 17:14] (current) – [Safety Concerns] mbates | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| - | ^ | + | ^ |
| | {{: | | {{: | ||
| - | | **Tool Type: | + | | **Tool Type: |
| - | | **Location: | + | | **Location: |
| + | | **Manufacturer: | ||
| - | | **Supervisor** | | + | | **Principal Scientist** | |
| - | | Juan Manuel Urueña | + | | Juan Manuel Urueña |
| - | | jmuruena@ucsb.edu | + | | jmuruena@ucsb.edu |
| - | | **Description: | ||
| - | | **Manufacturer: | ||
| ---- | ---- | ||
| Line 19: | Line 18: | ||
| ===== About ===== | ===== About ===== | ||
| - | Mono1 is a resin printer that uses a385 or 405 nm LED projector to polymerize the resin. It uses a proprietary software called Monoware to slice your object and interface with the printer. On Monoware one can upload an STL file from any CAD software and adjust the settings so the software slices the part automatically. | + | Mono1 is a resin printer that uses a projector to polymerize the resin. It uses a proprietary software called Monoware to slice your object and interface with the printer. On Monoware one can upload an STL file from any CAD software and adjust the settings so the software slices the part automatically. |
| ---- | ---- | ||
| Line 25: | Line 24: | ||
| ===== Detailed Specifications ===== | ===== Detailed Specifications ===== | ||
| - | * **Print | + | * **Print |
| * **Projected image:** 1280 x 800 px \\ | * **Projected image:** 1280 x 800 px \\ | ||
| * **Pixel resolution (XY):** 25 - 45 µm\\ | * **Pixel resolution (XY):** 25 - 45 µm\\ | ||
| * **Layer thickness: | * **Layer thickness: | ||
| - | * **wavelength: | + | * **wavelength: |
| * **Print Speed:** 25.4 mm/hour (varies with resins and layer thickness\\ | * **Print Speed:** 25.4 mm/hour (varies with resins and layer thickness\\ | ||
| * **Z-precision (motor-driven): | * **Z-precision (motor-driven): | ||
| * **Max build volume:** 96 X 56 X 130 mm (700 mL)\\ | * **Max build volume:** 96 X 56 X 130 mm (700 mL)\\ | ||
| - | * **Connectivity: | + | * **Connectivity: |
| * **Slicer Software:** MonoWare | * **Slicer Software:** MonoWare | ||
| Line 41: | Line 40: | ||
| ===== Safety Concerns ===== | ===== Safety Concerns ===== | ||
| - | Read the manufactures manual before first use. If the BIO X Cellink | + | Read the manufactures manual before first use. If the Mono1 printer |
| * Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury\\ | * Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury\\ | ||
| * Never clean or service the printer while it is on\\ | * Never clean or service the printer while it is on\\ | ||
| - | * The printer uses UV light for sterilization and curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure\\ | + | * The printer uses UV light for curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure\\ |
| - | * The printer has heated surfaces that can reach temperature up to 250 degrees Celsius. Never touch these surfaces when using the heating function. Allow things to cool before opening, touching the printer | + | * Always ensure that equipment is correctly mounted before use. Improperly |
| - | * Always ensure that equipment is correctly mounted before use. Imporperly | + | |
| - | + | ||
| - | ---- | + | |
| - | + | ||
| - | ===== Operating Procedures ===== | + | |
| - | + | ||
| - | Insert Text Here! | + | |
| ---- | ---- | ||
| Line 58: | Line 50: | ||
| ===== Reference Documentation ===== | ===== Reference Documentation ===== | ||
| - | {{ : | + | {{ : |
| ----- | ----- | ||
| - | ===== Training Documentation ===== | ||
mono1_printer.1623881636.txt.gz · Last modified: 2021/06/16 22:13 by jmuruena