Differences

This shows you the differences between two versions of the page.

--- mono1_printer [2021/06/16 23:04] – jmuruena
+++ mono1_printer [2024/10/10 17:14] (current) – [Safety Concerns] mbates
@@ Line 2: / Line 2: @@
-^             Mono1 Printer                               ^
+^             Mono1                              ^
 | {{:mono1.jpg?400|}} |
-| **Tool Type:**                  "3D Printer"                           |
+| **Tool Type:**                  Digital Light Processing (DLP)-based 3D Printer  |
-| **Location:**                   "Elings Hall 2436"                           |
+| **Location:**                   Elings Hall 2436                           |
+| **Manufacturer:**               MonoPrinter                           |
-|  **Supervisor**        |  **Tool Lead**  |
+|  **Principal Scientist**        |
-|  Juan Manuel Urueña    |  "WW Name"  |
+|  Juan Manuel Urueña    |
-|  jmuruena@ucsb.edu  |  "WW Email"  |
+|  jmuruena@ucsb.edu  |
-| **Description:**                "Mono1 3D Printer"|
-| **Manufacturer:**               "monoPRINTER"                           |
 ----
@@ Line 19: / Line 18: @@
 ===== About =====
-Mono1 is a resin printer that uses a 405 nm LED projector to polymerize the resin. It uses a proprietary software called Monoware to slice your object and interface with the printer. On Monoware one can upload an STL file from any CAD software and adjust the settings so the software slices the part automatically.
+Mono1 is a resin printer that uses a projector to polymerize the resin. It uses a proprietary software called Monoware to slice your object and interface with the printer. On Monoware one can upload an STL file from any CAD software and adjust the settings so the software slices the part automatically.
 ----
@@ Line 25: / Line 24: @@
 ===== Detailed Specifications =====
-* **Print thechnology:** DLP
+* **Print thechnology:** DLP\\
 * **Projected image:** 1280 x 800 px \\
 * **Pixel resolution (XY):** 25 - 45 µm\\
 * **Layer thickness:** 5 - 100 µm\\
-* **wavelength:** 385 or 405 nm\\
+* **wavelength:** 405 nm\\
 * **Print Speed:** 25.4 mm/hour (varies with resins and layer thickness\\
 * **Z-precision (motor-driven):** 25 µm\\
 * **Max build volume:** 96 X 56 X 130 mm (700 mL)\\
-* **Connectivity:** Wireless connectivity via USB
+* **Connectivity:** Wireless connectivity via USB\\
 * **Slicer Software:** MonoWare
@@ Line 41: / Line 40: @@
 ===== Safety Concerns =====
-Read the manufactures manual before first use. If the Mono 1 printer acts in a way that is not described by the manual, turn off the printer and contact monoPRINTER.\\
+Read the manufactures manual before first use. If the Mono1 printer acts in a way that is not described by the manual, turn off the printer and contact the principal scientist.\\
 	* Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury\\
 	* Never clean or service the printer while it is on\\
 	* The printer uses UV light for curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure\\
-	* Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, build platfomrs can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact monoPRINTER. \\
+	* Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, build platforms can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact the principal scientist. \\
-----
-===== Operating Procedures =====
-Insert Text Here!
 ----
@@ Line 57: / Line 50: @@
 ===== Reference Documentation =====
-{{ :mono3manual.pdf |}}
+{{ :mono3manual.pdf | Mono3 Manual}}
 -----
-===== Training Documentation =====