Differences

This shows you the differences between two versions of the page.

--- mono1_printer [2024/10/10 00:32] – mbates
+++ mono1_printer [2024/10/10 17:14] (current) – [Safety Concerns] mbates
@@ Line 6: / Line 6: @@
 | **Tool Type:**                  Digital Light Processing (DLP)-based 3D Printer  |
 | **Location:**                   Elings Hall 2436                           |
-| **Manufacturer:**               monoPRINTER                           |
+| **Manufacturer:**               MonoPrinter                           |
@@ Line 40: / Line 40: @@
 ===== Safety Concerns =====
-Read the manufactures manual before first use. If the Mono 1 printer acts in a way that is not described by the manual, turn off the printer and contact monoPRINTER.\\
+Read the manufactures manual before first use. If the Mono1 printer acts in a way that is not described by the manual, turn off the printer and contact the principal scientist.\\
 	* Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury\\
 	* Never clean or service the printer while it is on\\
 	* The printer uses UV light for curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure\\
-	* Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, build platfomrs can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact monoPRINTER. \\
+	* Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, build platforms can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact the principal scientist. \\
 ----
@@ Line 50: / Line 50: @@
 ===== Reference Documentation =====
-{{ :mono3manual.pdf |}}
+{{ :mono3manual.pdf | Mono3 Manual}}
 -----