Differences

This shows you the differences between two versions of the page.

--- mono3_printer [2024/10/10 00:45] – mbates
+++ mono3_printer [2024/10/10 17:12] (current) – [Reference Documentation] mbates
@@ Line 40: / Line 40: @@
 Read the manufactures manual before first use. If the Mono3 acts in a way that is not described by the manual, turn off the printer and contact Mono.\\
-	* Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury\\
+	* Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury.\\
-	* Never clean or service the printer while it is on\\
+	* Never clean or service the printer while it is on.\\
-	* The printer uses UV light for sterilization and curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure\\
+	* The printer uses UV light for sterilization and curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure.\\
 	* The printer has heated surfaces that can reach temperature up to 250 degrees Celsius. Never touch these surfaces when using the heating function. Allow things to cool before opening, touching the printer \\
-	* Always ensure that equipment is correctly mounted before use. Imporperly mounted print beds, printheads, cartridges, calbes liquid spouts and air spouts can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact CELLINK. \\
+	* Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, printheads, cartridges, calbes liquid spouts and air spouts can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact the principal scientist. \\
 ----
@@ Line 51: / Line 51: @@
 {{:mono1_rgb_leds-01.jpg?400|}}\\
-{{ :mono3manual.pdf |}}
+\\
+{{ :mono3manual.pdf | Mono3 Manual}}
 -----