Differences

This shows you the differences between two versions of the page.

--- stratasys_f270 [2020/07/13 18:14] – [Training Documentation] furst
+++ stratasys_f270 [2020/11/04 01:13] (current) – [Detailed Specifications] dave
@@ Line 20: / Line 20: @@
 ===== About =====
-The F270 is a fast and precise filament fed fusion deposition printer. Typically set up with ABS and a propitiatory Ecoworks soluble filament. Requires heated sodium hydroxide bath to remove support material.
+The F270 is a fast and precise filament fed fusion deposition printer. Typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath.
 ----
+===== Training Documentation =====
+[[F270_sop|FDM Printer SOP]]
+----
 ===== Detailed Specifications =====
 Build area: 308 x 254 x 308 mm \\
-Duel extrusion 3D printer (build and support material) \\
+Dual extrusion 3D printer (build and support material) \\
 capable of printing PLA, ABS, ASA, QSR \\
 .254 mm min layer thickness \\
-tolerance of +/- .200 mm \\
+XY tolerance of +/- .200 mm \\
 spool bay \\
@@ Line 36: / Line 39: @@
 ===== Safety Concerns =====
-Insert Text Here!
+  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
+  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
+  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from tank.
 ----
@@ Line 42: / Line 47: @@
 ===== Operating Procedures =====
-Insert Text Here!
+  - On the F270 printers computer, launch GrabCad Print
+  - Select File -> New Project -> Add Models -> Import desired models
+  - Move models around on virtual build tray so that models on a used build tray do not overlap any previously printed spots
+  - the purge block and printed model should be placed close together to minimize print time
+  - Select "Print Settings" from the menu on the right hand side
+  - From menu, select desired slice height, and verify that the first layer material is set to support.
+  - Open and place build tray into F270, making sure that the tray is locked in place by pulling up on the front locking arm until arm is PARALLEL to build tray.
+  - Select print, and send the job to the F270 3D printer
+  - on the F270 touch screen, select your job, and then select print.
-----
+-----
 ===== Reference Documentation =====
+{{:tools:stratasysf270:notes_on_post_processing_f270_parts.pdf|Notes on Post Processing}}
-{{:tools:stratasysf270:bp_fdm_supportremoval.pdf|}}
+{{:tools:stratasysf270:failed_3d_print_procedure.pdf|Failed 3D print Procedure}}
-{{:tools:stratasysf270:f123_series_operation_and_maintenance_rev_a.pdf|}}
+{{:tools:stratasysf270:bp_fdm_supportremoval.pdf|FDM Support Removal}}
-{{:tools:stratasysf270:sds_ecoworks_msds.pdf|}}
+{{:tools:stratasysf270:f123_series_operation_and_maintenance_rev_a.pdf|Operation and Maintenance rev. A}}
-{{:tools:stratasysf270:stratasys_f123_series_user_manual_.pdf|}}
+{{:tools:stratasysf270:sds_ecoworks_msds.pdf| Ecoworks filament MSDS }}
-GrabCAD Tips, Guides, and FAQs
+{{:tools:stratasysf270:stratasys_f123_series_user_manual_.pdf| User Manual }}
-[[https://help.grabcad.com/category/193-tips-guides-and-faqs]]
-Changing F270 fillament
-[[https://www.youtube.com/watch?v=LFdPajgFTDk]]
-Printing using the F270
+[[https://help.grabcad.com/category/193-tips-guides-and-faqs|GrabCAD Tips, Guides, and FAQs]]
-[[https://www.youtube.com/watch?v=t8KyZYLnGIk]]
-===== Training Documentation =====
-{{:tools:stratasysf270:notes_on_post_processing_f270_parts.pdf|}}
-Maintenance Schedule (see user maintenance page 80):
-  * Clean oven chamber weekly
-  * Clean platen weekly
-  * Inspect, wipe, and clean tip wipe assemblies monthly
-  * Clean exterior of printer as needed
-  * Clean touchscreen as needed
-----
+[[https://www.youtube.com/watch?v=LFdPajgFTDk|Changing F270 fillament]]
+[[https://www.youtube.com/watch?v=t8KyZYLnGIk|
+Printing using the F270]]
+-----