Differences

This shows you the differences between two versions of the page.

--- ultimaker3_extended [2020/08/18 17:43] – [Detailed Specifications] furst
+++ ultimaker3_extended [2020/11/04 01:06] (current) – [Detailed Specifications] dave
@@ Line 25: / Line 25: @@
 =====Training=====
 [[Ultimaker 3 SOP|FDM Printer SOP]]\\
-[[Ultimaker 3 Quick Review]]
 -----
@@ Line 35: / Line 36: @@
   *XYZ accuracy: 12.5, 12.5, 2.5 microns \\
   *Build plate temperature: 20-100 °C\\
-  *Nozzle temperature: 80 - 100 °C\\
+  *Nozzle temperature: up to 210 °C\\
 -----
@@ Line 45: / Line 46: @@
   * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
   * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
-  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from tank.
+  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from the  tank.
 ----
@@ Line 67: / Line 68: @@
 [[https://support.ultimaker.com/hc/en-us/articles/360012007119]]\\
 {{:tools:ultimaker3:pva_drying_recipe.pdf|}}\\
-{{:tools:ultimaker3:ultimaker_filaments_-_sheet1.pdf|}}
+{{:tools:ultimaker3:ultimaker_filaments_-_sheet1.pdf|}} \\
 {{:tools:ultimaker3:failed_3d_print_procedure.pdf|}}
+-----