ultimaker3_extended
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| ultimaker3_extended [2020/08/27 16:31] – [Reference Documentation] furst | ultimaker3_extended [2020/11/04 01:06] (current) – [Detailed Specifications] dave | ||
|---|---|---|---|
| Line 36: | Line 36: | ||
| *XYZ accuracy: 12.5, 12.5, 2.5 microns \\ | *XYZ accuracy: 12.5, 12.5, 2.5 microns \\ | ||
| *Build plate temperature: | *Build plate temperature: | ||
| - | *Nozzle temperature: | + | *Nozzle temperature: |
| ----- | ----- | ||
| Line 46: | Line 46: | ||
| * The print heads can be very hot - do not touch them with bare hands unless positive they are cool. | * The print heads can be very hot - do not touch them with bare hands unless positive they are cool. | ||
| * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury. | * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury. | ||
| - | * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from tank. | + | * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from the |
| ---- | ---- | ||
ultimaker3_extended.1598545870.txt.gz · Last modified: 2020/08/27 16:31 by furst