NSF BioPACIFIC MIP Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== WEN vertical Drill Press ======

^                           WEN vertical Drill Press                               ^
|          {{:tools:wen_drill_press:wen_drill_press.jpg?200|}}           |                                                 
| **Tool Type:**                  "Vertical Milling Machine"                   |
| **Location:**                   "Innovations Workshop"                   |


|  **Supervisor**        |  **Tool Lead**  |     
|  David Bothman         |  "WW Name"  |
|  (805) 893-4125        |  (###) ###-####  |
|  bothman@cnsi.ucsb.edu  |  "WW Email"  |

| **Description:**                "Drill Press"                           |
| **Manufacturer:**               "WEN"                           |

----

===== About =====
This vertical drill press is one of the largest upright tools in the Innovations Workshop. It has a speed control lever on the left side of the head, and a vertical quill feed on the right. The chuck key is located on the right side of the head and should be replaced after use to avoid mixing chuck keys. 

----

===== Detailed Specifications =====

  * Spindle Speed Range: 280-3,100 RPM (740-3,100 on main pulley)
  * Quill extension length: 4 3/8"
  * Max Drill Bit Diameter:16 mm
  * Max Work piece Height: 44"

----

===== Safety Concerns =====

  * Safety glasses, close toe shoes, and long pants must be warn when operating the machine
  * Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
  * Do not inhale any fumes resulting from drilling using oil
  * Do NOT wear gloves during operation of machine
  * Do not touch tool or spindle until the machine has stopped completely 

----

===== Operating Procedures =====

Insert Text Here!

----

===== Reference Documentation =====
{{:tools:wen_drill_press:coe_student_machine_shop_safety_handout.pdf|}}\\
{{:tools:wen_drill_press:coe_drill_press_sop.docx|}}


----


===== Training Documentation =====


[[Drill Press SOP]]
----