====== Diamond Saw ======


^            Diamond Saw                    ^
|                  {{:tools:diamondsaw:trimsaw-2-rotate.jpg?400|}}                                                     |
| **Tool Type:**                  "Cutting Tool"                           |
| **Location:**                   "Microfluidics Lab"                           |


|  **Supervisor**        |  **Tool Lead**  |     
|  David Bothman         |    |
|  (805) 893-4125        |    |
|  bothman@cnsi.ucsb.edu  |    |

| **Description:**                "Trim Saw 2"                           |
| **Manufacturer:**               "Allied"                           |

----

===== About =====
The Trimsaw 2 is a saw designed for rapid sectioning of printed circuit boards, ceramic substrates and other abrasive non metals. Contains a built in reservoir which can be used to feed lubrication directly to the blade.

----

=====Training=====
[[trimsaw2SOP]]


-----

===== Detailed Specifications =====
Motor power: .25 HP
Speed range: 500-3000 RPM by 100 RPM increments
Cutting platform: 6.75" x 12.5"
Blade size: 4"-6"
-----

===== Safety Concerns =====
  * Keep hands clear of blade when machine is on
  * Use only approved blades and do not cut metals with  sectioning blades
  * Use coolant or lubrication when making cuts
  * Use fixtures and guides whenever possible to reduce risk of slipping into the blade

----


===== Reference Documentation =====
  * [[http://consumables.alliedhightech.com/Sectioning-s/1818.htm|Allied blade catalog]]
  * [[https://www.ukam.com/|UKAM Industrial Superhard Tools]]
  * {{ :wiki:msds:kool_mist_78_msds.pdf |Kool Mist MSDS}}


-----