NSF BioPACIFIC MIP Wiki

3d_print_water_jet_cleaning_station

Anonymous (anonymous@undisclosed.example.com) — 2021-06-15T21:17:00+00:00

SMaLL Printer SMaLL Printer Tool Type: “3D Printer” Location: “Elings Hall 2436” Supervisor Tool Lead

about_the_laboratories

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T22:28:33+00:00

About The Laboratories BioPACIFIC MIP operates a one-of-a-kind user facility dedicated to creating a nexus between synthetic biology and materials to revolutionize high-performance polymers. The laboratories are jointly located at the California NanoSystems Institute (CNSI) at UCLA and UCSB.

about_the_workshops

Anonymous (anonymous@undisclosed.example.com) — 2020-08-13T17:13:40+00:00

About The Workshop The Innovation Workshop and Microfluidics Lab are both located in Elings Hall, home of the California NanoSystems Institute (CNSI) at University of California, Santa Barbara. The Microfluidics Lab, located in 3430 Elings, is a shared use research lab that provides equipment for the manufacturing of Microfluidic devices. In addition to a large selection of PDMS processing tools, the lab also houses a variety of lab equipment for other fabrications and scientific inquiries, ra…

access_and_training

Anonymous (anonymous@undisclosed.example.com) — 2024-09-05T04:02:06+00:00

Completion of a new user orientation and safety briefing is required before obtaining card-key access to any of the BioPACIF MIP laboratories. Tool-specific training is required for all tools and instruments in the BioPACIFIC MIP. During COVID-19 operations our training is limited. If you would like to become a lab user, or need to request training on tools please complete

access_and_training_ucla

Anonymous (anonymous@undisclosed.example.com) — 2024-09-06T00:53:15+00:00

Access to UCLA Laboratories 1. UCLA Logon Registration Visiting Researchers: You need to create a UCLA logon following these steps: * Go to UCLA Worksafe website: * Click the ‘New to Worksafe’ link on the login page. * Then you can create a UCLA Logon ID on the left-hand side of the screen:

access_and_training_ucsb

Anonymous (anonymous@undisclosed.example.com) — 2026-04-14T00:24:59+00:00

Access to UCSB Laboratories 1. Provide your project participant information (If you have already submitted your information, please skip this step). * For personnel that are being added after a project has been approved or started, please provide your

amp_led_uv-cube_ii

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:08:30+00:00

UV Curing Oven APM LED UV-Cube Tool Type: UV Curing Oven Location: Elings 2436 Manufacturer: APM

arbor_press

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:10:08+00:00

Arbor Press Dayton Arbor Press Tool Type: “Press” Location: “Innovations Workshop

bandsaw

Anonymous (anonymous@undisclosed.example.com) — 2020-08-14T16:56:43+00:00

Rikon Vertical Bandsaw vertical Bandsaw Tool Type: “Vertical Milling Machine” Location: “Innovations Workshop”

bandsaw_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-08-14T17:50:35+00:00

Bandsaw Safe Operating Procedure Rev. August 2020 Location The Rikon 14” bandsaw with StriaTech variable speed motor is located in 2448 Elings. Safety Concerns Serious injury and potential dismemberment can occur from contact with the moving saw blade. Eye injuries can result from flying chips or broken bits. Cuts can occur from contacting sharp tools or exposed chips and burrs. Burns can result from hot cutting tools or parts. Metal splinters can result from exposed burrs or chips. Serious…

biopsy_punch

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:25:43+00:00

Biopsy Punch Tool Type: “” Location: “” Supervisor

biotage_seleck_with_elsd_evaporative_light-scattering_detector

Anonymous (anonymous@undisclosed.example.com) — 2024-05-02T18:24:50+00:00

Biotage Seleck with ELSD (evaporative light-scattering detector) Biotage Seleck and ELSD Tool Type: Evaporation System Location: Elings Hall 2440

biotage_selekt_with_evaporative_light-scattering_detector_elsd

Anonymous (anonymous@undisclosed.example.com) — 2024-10-11T02:58:35+00:00

Biotage® Selekt Automated Flash Purification System Biotage Selekt with ELSD Tool Type: Automated Flash Chromatography System Location: Elings Hall 2440

biotage_v-10_touch_evaporation_system

Anonymous (anonymous@undisclosed.example.com) — 2024-10-11T03:05:30+00:00

Biotage V-10 Touch Evaporation System Biotage V-10 Touch Tool Type: Evaporation System Location: Elings Hall 2411

bio_x_printer

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T18:07:06+00:00

BIO X BIO X Tool Type: Extrusion-based Bioprinter Manufacturer: CELLINK Location: OASIS 413

boroscope

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:26:14+00:00

Boroscope Tool Type: “” Location: “” Supervisor

carbide3d_nomad

Anonymous (anonymous@undisclosed.example.com) — 2020-09-11T17:33:17+00:00

Carbide 3D Nomad CNC Router Carbide 3D Nomad CNC Router Tool Type: “CNC Router” Location:

carbide_3d_nomad_883_training_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-09-13T21:47:27+00:00

Carbide 3D Training SOP Last edited: Furst (09/08/20) Instructor: Date: Attendees: Name Group or Company Signature123456 Overview: * This training provides an introduction to using and operating the Carbide 3D Desktop CNC including: * Software

carbon_3d_printer

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T18:07:22+00:00

Carbon M2 3D Printer Carbon M2 Tool Type: 3D printer Location: OASIS 413 Manufacturer: Carbon

cascade_probe_station

Anonymous (anonymous@undisclosed.example.com) — 2020-04-03T21:43:52+00:00

Cascade REL 4800 Probe Station The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Cascade REL 4800 Probe Station Tool Type: “

checklist_onboarding_new_users

Anonymous (anonymous@undisclosed.example.com) — 2020-10-22T23:11:29+00:00

Before the new user orientation: * Read the COVID SOP and complete the attestation for CNSI * Read the COVID SOP and complete the attestations for 2448 and 3430 * Complete the EH&S fundamentals of laboratory safety course LS60 Schedule and attend a new user orientation for the Microfluidics Lab and Innovation Workshop

chemspeed-intro

Anonymous (anonymous@undisclosed.example.com) — 2024-05-02T18:21:09+00:00

CHEMSPEED Chemspeed Tool Type: Robotic Polymer Synthesis Platform Location: Elings Hall 2411 Supervisor

chemspeed_automated_chemistry_platform

Anonymous (anonymous@undisclosed.example.com) — 2024-10-14T20:30:38+00:00

Chemspeed Automated Chemistry Platform Chemspeed Tool Type: Robotic Polymer Synthesis Platform Manufacturer: Chemspeed Technologies

corning_hot_plate

Anonymous (anonymous@undisclosed.example.com) — 2020-08-05T03:06:21+00:00

Corning 6795-620D Hot Plate The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Corning 6795-620D Hot Plate Tool Type:

cricut

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T18:11:46+00:00

CriCut CriCut Tool Type: “TEXT HERE” Location: “TEXT HERE” Supervisor Tool Lead

cricut_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-10-09T18:46:54+00:00

Cricut Maker Training SOP Last edited: Furst (10/08/20) Instructor: Date: Attendees: Name Group or Company Signature123456 Overview: * This training provides an introduction to using and operating the Cricut Maker including: * File Types

diamond_saw

Anonymous (anonymous@undisclosed.example.com) — 2020-11-03T17:50:12+00:00

Diamond Saw Diamond Saw Tool Type: “Cutting Tool” Location: “Microfluidics Lab”

digital-eco-intro

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T19:49:00+00:00

What is the BioPACIFIC MIP Digital Ecosystem? The BioPACIFIC MIP Digital Ecosystem (DE) is a comprehensive, custom-built suite of digital tools for collecting, managing, analyzing, viewing, and accessing the data generated within BioPACIFIC MIP.

digital_microscope

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:26:48+00:00

Digital Microscope Tool Type: “” Location: “” Supervisor

digital_volt_meter

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:16:46+00:00

Digital Volt Meter Digital Volt Meter Tool Type: “Measuring Tool” Location: “Innovations Workshop

dimond_saw

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:27:50+00:00

Diamond Saw Tool Type: “” Location: “” Supervisor

drill_press_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-08-14T18:29:49+00:00

Cnsi Drill Press SOP Revised Aug 2020. Compiled with help from the UCSB ME Design Lab SOP written by Dr. Trevor Marks. Location The Wen 15” Floor Standing Drill Press is located in 2448 Elings Hall Safety Concerns Eye injuries can result from flying chips or broken bits. Cuts can occur from contacting sharp tools or exposed chips and burrs. Burns can result from hot cutting tools or parts. Metal splinters can result from exposed burrs or chips. Serious injury can result from pinching or ent…

droplet_workstation

Anonymous (anonymous@undisclosed.example.com) — 2020-11-02T20:53:56+00:00

Droplet Microfluidics Workstation Carbide 3D Nomad CNC Router Tool Type: “Microfluidics Instrument”

einscan-sp

Anonymous (anonymous@undisclosed.example.com) — 2020-08-31T19:17:43+00:00

EinScan-SP 3D Scanner EinScan-SP 3D Scanner Tool Type: “3D Scanner” Location: “Innovations Workshop”

einscantrainginsop

Anonymous (anonymous@undisclosed.example.com) — 2020-09-04T18:13:19+00:00

EinScan-SP Training SOP Last edited: Furst (8/28/20) Instructor: Date: Attendees: Name Group or Company Signature123456 ---------- Overview: This training provides an introduction to using the EinScan including: * Setting up and calibrating the scanner

electro-technic_treater

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:58:49+00:00

Electro-Technic BD-20AC Corona Treater Electro-Technic BD-20AC Corona Treater Tool Type: “TEXT HERE” Location: “TEXT HERE”

electronic_scales

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T17:14:18+00:00

Electronic Scales Digital Electronic Scale Tool Type: “Measuring Tool” Location:

eln-guide-basic-biological-plate-annotations

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T17:20:26+00:00

ELN: Well Plate Operations -- Biology: Basic Annotation Information One of the well plate annotation operations available in the ELN concerns biology-oriented plates. Here, you can create a general-purpose biology well plate (Fig 1). Three parameters must be defined before clicking 'Annotate Plate' will work: plate name (any label you wish to assign/designate as a name, up to 100 characters in length), configuration (the number of wells on the well plate), and plate stamp category (source, dest…

eln-guide-basic-chemical-ai-agent

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T17:07:20+00:00

ELN: Research Assistant The BioPACIFIC MIP Research Assistant is a retrieval-augmented generative (RAG) large language model (LLM). It is currently trained on over 10,000 research papers in the domain of materials science (polymer-focus); 8,000 papers in the domain of chemistry; and 4,000 papers in the domain of synthetic biology. Only approved BioPACIFIC MIP users can access the research assistant through the ELN.

eln-guide-basic-chemical-formulation-plate-annotations

Anonymous (anonymous@undisclosed.example.com) — 2025-04-09T18:55:21+00:00

ELN: Well Plate Operations -- Chemistry: Basic Annotation & Formulation Information One of the well plate annotation operations available in the ELN concerns chemical formulation-oriented plates. Here, you can create a general-purpose chemistry well plate (Fig 1). Two parameters must be defined before clicking 'Annotate Plate' will work: plate name (any label you wish to assign/designate as a name, up to 100 characters in length) and configuration (the number of wells on the well plate).

eln-guide-basic-data-dryad

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T21:51:03+00:00

Data Dryad Launchpad The ELN's Data Dryad Launchpad can be accessed from the Navigation bar (Fig 1). The launchpad allows users to generate Data Dryad (External Link) datasets, update them, and easily upload files attached to their relevant ELN pages directly to Dryad.

eln-guide-basic-data-integration

Anonymous (anonymous@undisclosed.example.com) — 2025-01-21T22:05:32+00:00

Page removed.

eln-guide-basic-editor

Anonymous (anonymous@undisclosed.example.com) — 2025-01-31T22:43:47+00:00

Notebooks First, make sure you've logged in via the user portal. Starting from the top navigation bar (Fig 1), “Notebooks” directs you to the meat of the ELN: the file tree of notebooks (akin to folders) and pages (akin to files), along with the annotation widgets and editor panel (Fig 2).

eln-guide-basic-file-attachments

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T16:58:07+00:00

ELN + LIMS Data Integration The BioPACIFIC MIP ELN does not stand in isolation within the digital ecosystem. In fact, the ELN serves as a critical data entry point for the BioPACIFIC MIP LIMS system. Information about chemicals, synthetic biology protocols, characterization data, and other essential data can be obtained from the ELN for sharing with the LIMS. The flow of information from the ELN to the LIMS is visualized in Fig 1.

eln-guide-basic-individual-well-annotations

Anonymous (anonymous@undisclosed.example.com) — 2025-04-08T16:41:54+00:00

ELN: Well Plate Operations -- Biology: Annotating Individual Wells Biological well plates in the ELN can be annotated on a well-by-well basis by clicking on a well in the well plate diagram, which subsequently opens an individual well annotation window to the right of the plate diagram, as shown in Fig 1.

eln-guide-basic-ownership-transfer

Anonymous (anonymous@undisclosed.example.com) — 2026-01-26T21:41:50+00:00

ELN: Transferring Account Ownership If you are a graduating student or other individual who is leaving BioPACIFIC MIP, you may want to transfer the ownership of your ELN account to someone else. You can achieve this by going to Settings -> Ownership, where you will be confronted with the screen shown in Fig 1.

eln-guide-basic-page-annotations

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T17:49:12+00:00

ELN Page Annotations Page Annotations are a unique feature of the ELN (Fig 1). These annotations come in the form of various modules, located at the top of any given ELN page, that collect information about different processes. This information helps to annotate the page about details such as: chemical reagent and product information for a synthesis; biological protocols used in a synthetic biology experiment; descriptions for the contents of well plates; and so on. This information remains lin…

eln-guide-basic-publish-retract-bulk

Anonymous (anonymous@undisclosed.example.com) — 2025-04-09T22:38:18+00:00

ELN: Publishing/Retracting Pages in Bulk You can bulk publish (or retract) your ELN pages by going to Settings -> Publishing in the ELN. Once you're there, you'll be presented with a screen like the one shown in Fig 1. You can choose to publish every page associated with your account, or publish every page in a selected notebook (Fig 2). For either option, simply follow the instructions to complete the publish/retract operation you're engaging in.

eln-guide-basic-publish-retract-page

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T17:20:57+00:00

ELN: Publishing or Retracting a Single Page Publishing (or retracting) an ELN page refers to making the overall contents, annotations, and associated files for a given page available (or unavailable) for view/access in the LIMS Data Viewer and API by the public. In other words: if you publish, your data is now

eln-guide-basic-research-groups

Anonymous (anonymous@undisclosed.example.com) — 2025-07-29T15:45:50+00:00

ELN User Groups The ELN enables users to create and manage user groups by navigating to Settings -> User Groups (Fig 1). Any user can create a group and invite other registered users to join it. Once joined, users must specify which notebooks from their account are visible to the group, after which, all users in the group will be able to view all of the pages in those notebooks.

eln-guide-basic-sharing-snapshots

Anonymous (anonymous@undisclosed.example.com) — 2025-01-22T18:42:43+00:00

ELN: Sharing Pages via Snapshots ELN pages can be shared with other approved users through the Snapshot mechanism. This will share the current state of your ELN page and its associated annotations with the user you choose (Fig 1). It is not a 'living' copy, meaning if you make changes to your notebook page after sharing a snapshot to another user, those changes are not reflected in the other user's shared page. This means you and the user you share a page with are free to continue making edits …

eln-guide-basic-shortcuts

Anonymous (anonymous@undisclosed.example.com) — 2025-01-21T23:09:37+00:00

Shortcuts There are several formatting shortcuts available in the ELN Editor. Thankfully, you can find most of these shortcuts quite easily. At the top-right corner of the Editor, there is an icon and text for “Editor Shortcuts”. Simply move your mouse over this area of the page and you'll see a tooltip shown in Fig. 1.

eln-guide-basic-special-commands

Anonymous (anonymous@undisclosed.example.com) — 2025-01-21T17:14:21+00:00

Special Commands This page is gone due to design changes to the ELN and LIMS.

eln-guide-basic-user-groups

Anonymous (anonymous@undisclosed.example.com) — 2025-07-29T22:35:42+00:00

eln-guide-basic-well-plate-annotations

Anonymous (anonymous@undisclosed.example.com) — 2025-04-09T19:11:20+00:00

ELN: Well Plate Annotations The BioPACIFIC MIP ELN provides a well plate annotation tool under the Annotations menu at the top of any given ELN page. Clicking on the Well Plates button brings you to the start of the Plate Annotation utility (Fig 1), where you can choose to add a

eln-intro

Anonymous (anonymous@undisclosed.example.com) — 2025-01-31T23:38:55+00:00

Click the image above to be redirected to either the user portal or the ELN page. What is an electronic laboratory notebook (ELN)? An electronic laboratory notebook, or ELN, is a type of software that is designed to capture experimental protocol information, e.g. synthetic protocols and procedures. An ELN acts as the first stop for your data in the lab, providing you with tools to organize and retain information necessary to replicating an experiment, or si…

eln-technology

Anonymous (anonymous@undisclosed.example.com) — 2025-01-21T17:12:11+00:00

What is the ELN built on? BioPACIFIC MIP's ELN system was built with the help of several free and open source libraries and technologies. A brief summary follows: Frontend * Svelte + SvelteKit * TipTap Backend * Rust + Axum * sqlx * SvelteKit

exposure_system

Anonymous (anonymous@undisclosed.example.com) — 2020-08-05T03:07:55+00:00

36W 365 nm UV Exposure System The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. 36W 365 nm UV Exposure System Tool Type:

f270_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-08-27T16:45:03+00:00

FDM Training SOP Last edited: Furst (08/26/20) Instructor: Date: Attendees: Name Group or Company Signature123456 Overview: * This training provides an introduction to using and operating the FDM 3D printers including: * File Types *

faq

Anonymous (anonymous@undisclosed.example.com) — 2021-01-12T19:39:46+00:00

Frequently asked Questions Drop-off / Pick-up box information * During COVID stage two operation samples, parts for customers, and any exchange of material between users of other labs and users of Elings Hall should be done through the sample drop box. Located behind Elings hall by the bike rack, the drop box contains many smaller bins within; the Innovations and mFL lab specific bin is located in the front left corner of the sample drop box. Be sure anything placed within the drop box is la…

fbs_reservation_information

Anonymous (anonymous@undisclosed.example.com) — 2020-11-20T18:12:21+00:00

The Microfluidics Lab and Innovation Workshops use FBS for reservations and billing. Login to FBS here FBS tutorial - [Making reservations in the Microfluidics Lab and Innovation Workshop] FBS tutorial - Workshop Wizard timekeeping

fisher_acumet

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:43:41+00:00

Fisher Acumet AB15 pH Meter Fisher Acumet AB15 pH Meter Tool Type: “TEXT HERE” Location: “TEXT HERE”

form2

Anonymous (anonymous@undisclosed.example.com) — 2021-03-15T17:53:29+00:00

FormLabs Form 2/3 SLA 3D Printer FormLabs Form 2 SLA 3D Printer Tool Type: “3D Printer” Location: “Innovations Workshop

form2sop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:39:55+00:00

Form 2/3 Training SOP Last edited: Furst (8/28/20) Instructor: Date: Attendees: Name (Last, First) Group or Company Signature (First, Last)123456 ---------- Overview: * This training provides an introduction to using and operating the FormLabs SLA 3D printers including:

formcure_uv

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T17:00:05+00:00

FormCure UV Curing Station FormCure UV Curing Station Tool Type: “UV Curing Station” Location: “Innovations Worship”

formwash_cleaner

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T16:47:40+00:00

Form Wash Cleaner Form Wash Cleaner Tool Type: “Formlabs alcohol cleaner” Location: “Innovations Workshop” Supervisor

general_organic_solvent_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-02-26T18:16:10+00:00

BASIC FLAMMABLE and COMBUSTIBLE LIQUIDS HANDLING STANDARD OPERATING PROCEDURE TEMPLATE This SOP is for work in which flammable/combustible liquids are NOT used in operations that often generate static electricity which can act as an ignition source; including the pumping or pouring of solvents between metal containers. Those operations require grounding and/or bonding of the containers to prevent static buildup and a different SOP template in the UCSB SOP Library should be used: ADVANCED FLA…

genevac_ez2_4.0_benchtop_evaporator

Anonymous (anonymous@undisclosed.example.com) — 2024-10-21T18:20:34+00:00

Genevac EZ-2 4.0 Elite Genevac EZ-2 4.0 Elite Tool Type: Parallel Evaporation System Location: Elings Hall 241

grinder

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T17:03:39+00:00

Dewalt Bench Grinder Dewalt Bench Grinder Tool Type: “Vertical Milling Machine” Location: “Innovations Workshop”

grindersop

Anonymous (anonymous@undisclosed.example.com) — 2020-08-13T18:42:18+00:00

CNSI Innovation Workshop Benchtop Grinder User Outline This guide may be found online through the Innovation Workshop and microfluidics wiki. Location The benchtop grinder is located in 2448 Elings Hall next to Fume Hood #3. Safety * Part not secure and becoming a projectile

gyros_protein_technologies_symphony_x_peptide_synthesizer

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T01:23:09+00:00

SYMPHONY X SYMPHONY X Tool Type: “PEPTIDE SYNTHESIZER” Location: “Elings Hall 2411” Supervisor

haas_mini_mill

Anonymous (anonymous@undisclosed.example.com) — 2021-03-10T18:15:31+00:00

Haas Super Mini Mill The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Haas Super Mini Mill Tool Type:

haas_super_mini_mill_training_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-03-11T19:53:01+00:00

Haas Super Mini Mill Training SOP Last edited: Furst (09/28/20) Instructor: Date: Attendees: Name Group or Company Signature123456 Overview: * This training provides an introduction to using and operating the Haas CNC mill including: * Software

height_gauge

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:25:30+00:00

Height Gauge Height Gauge with digital indicator Tool Type: “Measuring Tool” Location:

hot_press

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:28:24+00:00

Hot Press Hot press Tool Type: “Press” Location: “Microfluidics Lab”

hot_wire_cutter

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:31:05+00:00

Hot Wire Cutter Tool Type: “” Location: “” Supervisor

innovations_workshop_tools

Anonymous (anonymous@undisclosed.example.com) — 2021-03-15T17:44:34+00:00

Innovation Workshop Tools * Formlabs Form2 SLA 3D Printer Formlabs 2/3 * EinScan-SP 3D Scanner EinScan-SP * MiiCraft 50 DLP 3D Printer MiiCraft 50 * Ultimaker3 Extended Dual FDM 3D Printer Ultimaker3 Extended * Stratsys F270 FDM 3D Printer Stratasys F270 * ShopBot Desktop CNC Router Shopbot Desktop * Carbide 3D Nomad CNC Router

inverted_microscope

Anonymous (anonymous@undisclosed.example.com) — 2021-08-24T18:42:52+00:00

Zeiss Inverted Microscope Zeiss Axio Observer 7 Tool Type: “Inverted Microscope” Location: “Elings Hall 2411”

jig_saw

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:30:41+00:00

Jig Saw Jig Saw Tool Type: “Cutting Tool” Location: “Innovations Workshop”

keyence_microscope

Anonymous (anonymous@undisclosed.example.com) — 2020-11-12T18:34:11+00:00

Keyence VHX-5000 Microscope Keyence VHX-5000 Microscope Tool Type: “Observation” Location: “Microfluidics Lab”

keyence_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:41:40+00:00

Keyence Microscope Training SOP Last edited: Furst (11/03/20) Instructor: Date: Attendees: Name (Last, First) Group or Company Signature (First, Last)123456 ---------- Overview: * This training provides an introduction to using and operating the Keyence microscope including:

labconco_lyophilzer

Anonymous (anonymous@undisclosed.example.com) — 2024-10-15T00:31:15+00:00

Labconco Labconco FreeZone Benchtop Freeze Dryer Tool Type: Lyophilizer Manufacturer: Labconco Location: Elings Hall 2440

laser_cutter_training_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:41:13+00:00

CNSI Innovation Workshop and Microfluidics Lab Trotec Speedy100 and Rayjet 300 Safe Operating Procedures Last Updated: Furst (8/28/20) This SOP is compiled from the following sources. For more information reference these sources. * Trotec Speedy Manual * [Rayjet speedy Manual] *

laser_cutting_data

Anonymous (anonymous@undisclosed.example.com) — 2020-02-06T23:28:40+00:00

CNSI Microfluidics Laser Cutting Data Material Vendors Acrylic sheet, optically clear, from McMaster Carr: part number 8560K239 Cutting Parameters Acrylic Sheet Cutting 1/8”, 100% power, 0.4 ipm, 2000 Hz, (Dave Bothman, 5/5/13 - clean cut)

laser_welder

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:38:20+00:00

Laser Welder Laser Welder Tool Type: “Joining Tool” Location: “Microfluidics Lab

lbf-btx

Anonymous (anonymous@undisclosed.example.com) — 2024-10-08T21:18:18+00:00

About Scalability, efficiency and versatility are key advantages the system offers researchers. Thanks to the HT-200 High-Throughput Plate Handler, the Gemini X2 can simultaneously place 96 distinct DNA/RNA constructs inside a variety of organisms — and do it in under 20 seconds.

lbf-fluent

Anonymous (anonymous@undisclosed.example.com) — 2024-11-25T07:20:27+00:00

Fluent Liquid Handler About The Fluent Liquid Hander is a state-of-the-art automated liquid handler designed to streamline workflows, optimize assay precision, ensure consistency, and free staff up for more valuable tasks. It has exceptional liquid level detection and dead volume reduction to conserve samples and reagents, as well as fantastic low-volume pipetting. The customizable modular system known as the Patented Dynamic Deck

lbf-intro

Anonymous (anonymous@undisclosed.example.com) — 2024-10-08T21:48:37+00:00

Introduction An automated, high-throughput platform for gene assembly, amplification, transformation, strain growth, and metabolite analysis enables the production of bio-based monomers and polymers with precise repeat units, domains and chirality directly from microorganisms. By providing an equipment set focused on automation, control, and high-throughput pathway assembly at the gene level and metabolite detection at the cellular level, the Living Biofoundry will enable biosynthetic manufac…

lbf-las

Anonymous (anonymous@undisclosed.example.com) — 2025-06-28T00:19:06+00:00

About The ThermoFisher Laboratory Automation System (LAS) serves as the cornerstone technology for the Living Biofoundry, enabling execution of automated customized synthetic biology and workflows at >500 samples-per-week. The LAS is equipped with over of over 10 functional instrumental components, including: a state-of-the-art SpinnakerTM microplate robot, automated incubators, reagent dispensers, thermal cyclers, plate sealer, and carousels/racks that are seamlessly integrated through the M…

lbf-tsqaltis

Anonymous (anonymous@undisclosed.example.com) — 2025-06-27T18:11:31+00:00

About Thermo Fisher TSQ Altis inline triple quadrupole mass spectrometer coupled with an ultra-high-performance liquid chromatograph (UHPLC/MS/MS) for separation and analysis of synthesized bio-derived monomers. The system is ideal for targeted metabolite analysis. The device can accurately measure between 5-2000 m/z mass range with Active Ion Management (AIM) technology. The device also contains 6 channel high-pressure solvent blending, allowing a variety of solvents to run through various c…

led_plate

Anonymous (anonymous@undisclosed.example.com) — 2025-01-16T19:39:08+00:00

LumiDox II LED Array Tool Type: 96-well LED Array Location: Elings Hall 2411 Manufacturer: Analytical Sales Description: Chemspeed and Zeiss Microscope Compatible

library-intro

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T22:03:53+00:00

What is the BioPACIFIC MIP Materials Library? The BioPACIFIC MIP Materials Library (hereafter, Library) is a publicly-accessible application (Fig 1) that displays all of the chemicals/materials (Fig 2) available for sample request. Sample requests are a proposal-driven process that be submitted

lims-data-structures

Anonymous (anonymous@undisclosed.example.com) — 2026-02-13T19:05:31+00:00

How is Data Organized in the LIMS? The LIMS system utilizes several data model constructs in order to store data uploaded from the ELN or uploaded to the LIMS directly. All data models ultimately connect to the Experiment data model. Experiment data objects are created and updated for each unique ELN page. These Experiment data objects provide the tracking for any and all protocols, characterization data, and chemical synthesis linked via annotation in any ELN page to the LIMS itself. There are…

lims-guide-api

Anonymous (anonymous@undisclosed.example.com) — 2026-02-13T18:52:39+00:00

Accessing the LIMS Programmatically Data from the LIMS can be accessed programmatically using the LIMS' representational state transfer (REST) application programming interface (API). The REST API is documented according to OpenAPI standards and is presented in the Swagger documentation style, as shown in Fig 1.

lims-guide-data-prep-tutorial

Anonymous (anonymous@undisclosed.example.com) — 2024-03-04T22:39:14+00:00

Tutorial: LIMS Data Upload This is going to be revised...

lims-guide-data-viewer

Anonymous (anonymous@undisclosed.example.com) — 2026-02-13T18:42:43+00:00

Data Viewer The public-facing LIMS website serves as a data viewer for files uploaded to the system, as shown in Fig 1. Fig 1. Highlighting the “Data Viewer” link associated with each instrument. When you go to the LIMS website, you are greeted by the Search screen, as shown in Fig 2. You can search by several different factors: experiment name, instrument type, data category, and so on., More search categories will be added at a future date. You can also restrict the search to cert…

lims-guide-import-wizard

Anonymous (anonymous@undisclosed.example.com) — 2024-03-05T18:48:48+00:00

Import Wizard Uploading data to the BioPACIFIC MIP LIMS was, at one time, an overwhelming process. That changed with the revision released in December 2023. Now, data is uploaded to the LIMS through the Import Wizard (Fig 1) and relies on data retrieved from the BioPACIFIC MIP ELN.

lims-guide-metadata

Anonymous (anonymous@undisclosed.example.com) — 2023-05-04T17:42:08+00:00

What is metadata? Metadata is the data that describes your data. For the LIMS, metadata comes in the form of JSON (JavaScript Object Notation) files. These files are collections of key: value pairs that contain the information required in order to incorporate a piece of data into the LIMS system.

lims-guide-preparing-data

Anonymous (anonymous@undisclosed.example.com) — 2023-04-07T20:36:08+00:00

How do I add data to the LIMS? Preparing data for transmission to the LIMS is straightforward and you need only two things: 1) your metadata file and 2) the name/location of the transfer folder. ---------- Generating your metadata file The LIMS system has tools for generating metadata tools. You should/must use these tools to generate a correctly formatted metadata file! Metadata files can be produced one at a time (via the form, Fig 1) or in batches (via the batch utility, Fig 2), as sh…

lims-guide-viewing-data

Anonymous (anonymous@undisclosed.example.com) — 2024-03-04T22:39:37+00:00

How do I view my data in the LIMS? This is going to be revised...

lims-intro

Anonymous (anonymous@undisclosed.example.com) — 2026-02-13T18:42:54+00:00

What is a laboratory information management system (LIMS)? A laboratory information management system, or LIMS (Fig 1), is a system designed to help manage large volumes of data produced from experimental workflows. In its simplest form, a LIMS provides tracking and history for a given sample as it progresses through various stages of synthesis and characterization.

lims-technology

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T21:01:30+00:00

What is the LIMS built on? BioPACIFIC MIP's LIMS system was built with the help of several free and open source libraries and technologies. A brief summary follows: Frontend * Svelte + SvelteKit * Plotly JS Backend * Django 5.2 * Django REST Framework (DRF)

lumen_x

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:21:26+00:00

LUMEN X LUMEN X Tool Type: Digital Light Processing (DLP)-based Bioprinter Location: Elings Hall 2436

machine_tools

Anonymous (anonymous@undisclosed.example.com) — 2020-07-13T19:00:26+00:00

Machine Tools Safety Concerns Sequences of Operation Bandsaw Documentation Approved Materials Ferrous and hard metals (steels, stainless steels, titanium) Non-Ferrous metals (aluminum, bronze, brass, copper) Wood Plastics Checklist 1. Adjust the blade guard to be approximately 1/4

maps-intro

Anonymous (anonymous@undisclosed.example.com) — 2026-02-03T17:57:43+00:00

What is the BioPACIFIC MIP Machine Assisted Product Screening (MAPS) Tool? The MAPS tool bridges an unexplored gap between synthetic biology and chemistry to enable researchers to search for bio-derived polymers through knowledge retrieval and ML-driven monomer prediction. This tool gathers information about chemical compounds in the natural product space to evaluate them for their potential as polymer building blocks.

microed-intro

Anonymous (anonymous@undisclosed.example.com) — 2024-10-23T17:34:25+00:00

Micro Electron Diffraction Spectra 300C Tool Type: “Spectra 300C” Location: “CNSI”

microed-sample

Anonymous (anonymous@undisclosed.example.com) — 2024-10-02T21:42:03+00:00

Sample Preparation Grids Thickness: 25 μm Diameter: 3 mm Film on “dull” side “Shiny” side has the metal only * Ultrathin Carbon Film on a Lacey Carbon Support Film * * 01824 Ultrathin Carbon Film on Lacey Carbon Support Film, 400 mesh, Copper

microed-shipping

Anonymous (anonymous@undisclosed.example.com) — 2024-10-02T20:42:32+00:00

Shipping 570 Westwood Plaza, EICN Room B122 Building 114, CNSI, UCLA Los Angeles, CA 90095

microfluidics_fitting_bonding_tool

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:32:20+00:00

Microfluidics Fitting/Bonding Tool Tool Type: “” Location: “”

microfluidics_lab_tools

Anonymous (anonymous@undisclosed.example.com) — 2020-08-08T00:33:20+00:00

Microfluidics Lab Tools * Laurell WS-650M Spin Coater Spin Coater * Trotec Speedy 100 Trotec Speedy * Fisher Acumet AB15 pH Meter Fisher Acumet * Novascan Ozone Cleaner Novascan Ozone Cleaner * Thinky ARE-310 Mixer Thinky Mixer * Flashcut / Sherline CNC Mill Sherline CNC Mill * Electro-Technic BD-20AC Corona Treater

miicraft_50

Anonymous (anonymous@undisclosed.example.com) — 2020-08-14T19:05:37+00:00

MiiCraft 50 DLP 3D Printer MiiCraft 50 DLP 3D Printer Tool Type: “TEXT HERE” Location:

miicraft_50_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-08-17T17:44:44+00:00

Miicraft 50 SOP Location The MiiCraft 50 3D printer is located on the west wall lab bench in 2442 Elings Hall Safety Concerns: * The resin used for casting PDMS molds is highly toxic. Wear gloves and a labcoat when handling * Follow proper fume hood procedure when cleaning parts

mill

Anonymous (anonymous@undisclosed.example.com) — 2020-11-12T17:58:55+00:00

Precision Matthews Milling Machine Precision Matthews Milling Machine Tool Type: “Vertical Milling Machine” Location:

millsop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:39:00+00:00

Manual Milling Machine Training SOP Last edited: Furst (10/12/20) Instructor: Date: Attendees: Name (Last, First) Group or Company Signature (First, Last)123456 ---------- Tool Location Innovation Workshop, Elings 2448 Overview: PM-25MV Mill

mini_drill_press

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T16:41:42+00:00

Mini Drill Press Mini Drill Press Tool Type: “Drilling Tool” Location: “Innovations Workshop

miter_saw_panel_saw

Anonymous (anonymous@undisclosed.example.com) — 2020-11-30T18:15:57+00:00

Miter Saw Festool Kapex KS 120 REB Sliding Compound Miter Saw Tool Type: “Wood/Metal Working” Location:

miter_saw_sop

Anonymous (anonymous@undisclosed.example.com) — 2020-12-21T01:19:22+00:00

Miter Saw Training SOP Last edited: Furst (11/25/20) Instructor: Date: Attendees: Name Group or Company Signature123456 ---------- Overview: * This training provides an introduction to using and operating the Festool miter saw including: *

mono1_printer

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:14:08+00:00

Mono1 Printer Mono1 Tool Type: Digital Light Processing (DLP)-based 3D Printer Location: Elings Hall 2436 Manufacturer: MonoPrinter

mono3mz2_dlp_printer_visible_light

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T18:08:21+00:00

MONO3MZ2 - Mono3MZ2 Tool Type: Multi-Wavelengths Location: OASIS 413 Manufacturer: MonoPrinter

mono3vz2_dlp_3d_printer_365_nm_-_460_nm

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T18:08:04+00:00

Mono3VZ2 - High Power 365 nm and 465 nm Mono3VZ2 | Tool Type: High power printer Location: OASIS 413 Manufacturer: MonoPrinter

mono3vz2_dlp_printer_visible_light

Anonymous (anonymous@undisclosed.example.com) — 2026-03-11T19:16:03+00:00

Mono3VZ2 - High Power 365 nm and 465 nm Mono3MZ2 | Tool Type: High power printer Location: Oasys 400 Manufacturer: MonoPrinter

mono3z2_dlp_3d_printer_365_nm_-_460_nm

Anonymous (anonymous@undisclosed.example.com) — 2026-03-11T19:18:39+00:00

Mono3VZ2 - High Power 365 nm and 465 nm Mono3MZ2 | Tool Type: High power printer Location: Oasys 400 Manufacturer: MonoPrinter

mono3z2_dlp_3d_printer_visible_light

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:20:37+00:00

Mono3Z2 - Panchromatic Printer Mono3Z2 Tool Type: Panchromatic Printer Location: Elings Hall 2436 Manufacturer: MonoPrinter

mono3_printer

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:12:11+00:00

Mono3 Printer Mono3 (RGB) Printer Tool Type: 3D Printer Location: Elings Hall 2436 Manufacturer: MonoPrinter

mono3_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-06-20T20:20:18+00:00

Mono3 SOP Location The Mono3 3D printer is located in 2436B Elings Hall Safety Concerns: * The resin used for casting PDMS molds is highly toxic. Wear gloves and a labcoat when handling * Follow proper fume hood procedure when cleaning parts

neytech_qex_furnace

Anonymous (anonymous@undisclosed.example.com) — 2020-04-03T21:46:48+00:00

Neytech Qex Furnace Neytech Qex Furnace Tool Type: “TEXT HERE” Location: “TEXT HERE” Supervisor

novascan_ozone_cleaner

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:45:07+00:00

Novascan Ozone Cleaner Novascan Ozone Cleaner Tool Type: “TEXT HERE” Location: “TEXT HERE”

nuaire_flow_hood

Anonymous (anonymous@undisclosed.example.com) — 2020-04-03T21:40:04+00:00

Nuaire Laminar Flow Hood The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Nuaire Laminar Flow Hood Tool Type:

objet30pro

Anonymous (anonymous@undisclosed.example.com) — 2020-09-04T18:17:23+00:00

Stratasys Objet30 Pro Polyjet 3D Printer Stratasys Objet30 Pro Polyjet 3D Printer Tool Type: 3D Printer

objet30trainingsop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:40:45+00:00

Objet 30 Users Outline and SOP Last edited: Furst (8/28/20) Instructor: Date: Attendees: Name (Last, First) Group or Company Signature (First, Last)123456 ---------- Location: The Objet 30 Pro printer is located in 3430 Elings Hall Safety Issues:

olympus_ax-70

Anonymous (anonymous@undisclosed.example.com) — 2020-04-03T21:45:01+00:00

Olympus AX-70 The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Olympus AX-70 Tool Type: “TEXT HERE

optical_alignment_tool

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:33:42+00:00

Optical Alignment Tool Tool Type: “” Location: “”

optics11_pavone

Anonymous (anonymous@undisclosed.example.com) — 2024-12-13T03:31:42+00:00

High-Througput Microindenter Optics 11 Pavone Tool Type: “High-Trhroughput Microindenter” Location: “Elings Hall 2411”

oscilloscope

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:34:04+00:00

Oscilloscope Tool Type: “” Location: “” Supervisor

pipette_cutter

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:34:28+00:00

Pipette Cutter Tool Type: “” Location: “” Supervisor

plasma_cleaner

Anonymous (anonymous@undisclosed.example.com) — 2020-10-21T21:41:12+00:00

Harrick Plasma Cleaner PDC-32G Plasme Cleaner Tool Type: “Cleaning Tool” Location: “Microfluidics Lab” Supervisor

popular_links

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T16:23:36+00:00

Popular Links Report a Problem Submit a Job [3D Printer Filament/Resin Prices] Website Feedback Form FBS

portal-intro

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T20:57:01+00:00

Click the image above to be redirected to the user portal. What is the BioPACIFIC MIP Digital Ecosystem User Portal? The BioPACIFIC MIP Digital Ecosystem User Portal (Portal) is the entry point for all BioPACIFIC MIP-related web applications and shared digital tools (as shown in Fig 1). Users can log into the ecosystem using any email account. Login access is further simplified for Gmail-based accounts, including UCSB and UCLA accounts. Select services, …

portal-technology

Anonymous (anonymous@undisclosed.example.com) — 2026-01-27T21:00:33+00:00

What is the Portal built on? BioPACIFIC MIP's Portal system was built with the help of several free and open source libraries and technologies. A brief summary follows: Frontend * Django Templates * HTMX * AlpineJS Backend * Django 5.2

power_supplies

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:34:51+00:00

Power Supplies Tool Type: “” Location: “” Supervisor

prelude_x

Anonymous (anonymous@undisclosed.example.com) — 2024-11-25T21:08:22+00:00

Prelude X Prelude X Tool Type: Automated Peptide Synthesizer Manufacturer: Gyros Protein Technologies Location:

pressure_casting_chamber

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:46:13+00:00

Pressure Casting Chamber X-11 Pressure Casting Chamber Tool Type: “PDMS Casting” Location:

primo

Anonymous (anonymous@undisclosed.example.com) — 2020-08-05T03:03:24+00:00

PRIMO The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. PRIMO Tool Type:

rayjet_300

Anonymous (anonymous@undisclosed.example.com) — 2020-08-31T18:46:23+00:00

Rayjet 300 150W Laser Cutter Rayjet 300 150W Laser Cutter Tool Type: “laser Cutter” Location: “Innovations Workshop”

references_vendors_supplies

Anonymous (anonymous@undisclosed.example.com) — 2024-09-05T03:40:49+00:00

Innovations Workshop Resources A (mostly) complete inventory of the Innovations Workshop can be found: here. The lab is organized into six main storage sections labeled A through F, with A being the easternmost bench and F being the westernmost bench. Cabinets should be labeled and updated if changes occur.

rs232_file_transfer_documentation

Anonymous (anonymous@undisclosed.example.com) — 2021-03-10T18:32:20+00:00

RS232 File Transfer Documentation The Haas Super Mini Mill and its adjacent computer are connected via an analog RS232 interface which allows the rapid transfer of G-code via HSMWorks. * Post the G-code through imbedded HSMWorks within SolidWorks. Insure that

ruler

Anonymous (anonymous@undisclosed.example.com) — 2021-04-23T17:42:22+00:00

table caption A1 B1 A2 B2

sander

Anonymous (anonymous@undisclosed.example.com) — 2020-08-13T18:44:02+00:00

Grizzly bench Combo Disk/Belt Sander Tool Type: “” Location: “Innovations Workshop” Supervisor Tool Lead David Bothman “WW Name

saxs-intro

Anonymous (anonymous@undisclosed.example.com) — 2024-10-14T04:13:52+00:00

About the SAXS/WAXS Diffractometer Small angle X-ray scattering (SAXS) is a premier technique for determining structural characteristics on the nanometer scale. The utilization of SAXS for high throughput sample characterization in a laboratory environment however is typically inhibited by a variety of factors, such as low x-ray brilliance for in-house setups, lack of synchrotron availability, and general and complexity in data analysis, among other factors. The BioPACIFIC Materials Innovation …

sca_naoh_bath

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T17:08:28+00:00

SCA 1200 HT NaOH parts bath SCA 1200 HT NaOH parts bath Tool Type: “3D print support Dissolve” Location: “TEXT HERE”

sherline_cnc_mill

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:56:54+00:00

Flashcut / Sherline CNC Mill Flashcut / Sherline CNC Mill Tool Type: “TEXT HERE” Location: “TEXT HERE”

shimadzu_nexera_analytical_hplc

Anonymous (anonymous@undisclosed.example.com) — 2024-10-16T20:13:03+00:00

Shimadzu Nexera Analytical HPLC-MS Shimadzu Nexera HPLC-MS Tool Type: Analytical Characterization Location: Elings Hall 2411

shimadzu_nexera_analytical_preparative_hybrid_hplc

Anonymous (anonymous@undisclosed.example.com) — 2024-05-02T18:23:27+00:00

Analytical/Preparative Hybrid HPLC Shimadzu Nexera HPLC Tool Type: Analytical/Preparative HPLC Location: Elings Hall 2411

shimadzu_nexera_preparative_hplc

Anonymous (anonymous@undisclosed.example.com) — 2024-10-16T20:12:48+00:00

Shimadzu Nexera Preparative HPLC-MS Shimadzu Nexera HPLC-MS Tool Type: Reverse-phase Preparative Purification Location: Elings Hall 2411

shopbotdesktoptrainingsop

Anonymous (anonymous@undisclosed.example.com) — 2020-09-25T17:52:39+00:00

ShopBot Desktop Training SOP Last edited: Furst (09/13/20) Instructor: Date: Attendees: Name Group or Company Signature123456 Overview: * This training provides an introduction to using and operating the ShopBot Desktop CNC router including:

shopbot_desktop

Anonymous (anonymous@undisclosed.example.com) — 2020-09-11T17:37:44+00:00

ShopBot Desktop CNC Router ShopBot Desktop CNC Router Tool Type: “CNC Router” Location:

sidebar

Anonymous (anonymous@undisclosed.example.com) — 2026-04-03T17:27:49+00:00

BioPACIFIC MIP Laboratories Home About the Laboratories Access and Training (UCSB) Access and Training (UCLA) Visiting UCSB Campus Visiting UCLA Campus Additive Manufacturing BIO X Carbon 3D Printer Mono3VZ2 DLP 3D Printer (365 nm - 460 nm) Mono3MZ2 DLP Printer (Visible Light) SMaLL Printer AMP LED UV-Cube II Yamamoto Constant Temperature Oven Digital Ecosystem Overview User Portal Introduction: User Portal Technology List: User Portal Electronic Laboratory Notebook (ELN) I…

small_printer

Anonymous (anonymous@undisclosed.example.com) — 2024-10-10T17:10:24+00:00

SMaLL Printer Solution Mask Liquid Lithography (SMaLL) Printer Tool Type: Multimaterial DLP-based 3D Printer Location: Elings Hall 2436

sonoplot_multimaterial_writer

Anonymous (anonymous@undisclosed.example.com) — 2021-01-07T20:30:25+00:00

Sonoplot Multimaterial Writer Microplotter Tool Type: “Laboratory” Location: “Microfluidics Lab

spin_coater

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:29:56+00:00

Laurell WS-650M Spin Coater Laurell WS-650M Spin Coater Tool Type: “TEXT HERE” Location: “TEXT HERE”

spraybase_electrospinning_spraying_tool

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:36:27+00:00

Spraybase Electrospinning and Spraying Tool Tool Type: “” Location: “”

standard_operating_procedures

Anonymous (anonymous@undisclosed.example.com) — 2017-03-10T18:37:38+00:00

Microfluidics Lab Standard Operating Procedures Standard operating procedures outline approved safety procedures for working with chemicals, instruments and tools in the lab. Chemical SOPs General solvent SOP 3D print alcohol rinse tanks Spin coating polyurethane

start

Anonymous (anonymous@undisclosed.example.com) — 2024-10-14T21:20:21+00:00

BioPACIFIC MIP BioPACIFIC MIP (Bio Polymer, Additive Manufacturing, and Composites Innovation for Chemistry, Materials, and Interfaces Program) is a Materials Innovation Platform funded by the National Science Foundation (NSF), dedicated to advancing research and development in the fields of polymers, biomaterials, soft materials, and synthetic biology. Its primary mission is to accelerate materials discovery and innovation by integrating cutting-edge tools, experimental methods, and data scien…

stratasys_f270

Anonymous (anonymous@undisclosed.example.com) — 2020-11-04T01:13:16+00:00

Stratsys F270 FDM 3D Printer Stratsys F270 FDM 3D Printer Tool Type: “F3D printer” Location:

stratasys_object30_pro_polyjet_3d_printer

Anonymous (anonymous@undisclosed.example.com) — 2021-06-18T13:00:30+00:00

Stratasys Objet30 Pro Polyjet 3D Printer Stratasys Objet30 Pro Polyjet 3D Printer Tool Type: 3D Printer

symphony-intro

Anonymous (anonymous@undisclosed.example.com) — 2024-05-02T18:19:05+00:00

SYMPHONY X Symphony X Tool Type: Automated Peptide Synthesizer Location: Elings Hall 2411 Supervisor

symphony_x

Anonymous (anonymous@undisclosed.example.com) — 2024-11-25T21:08:47+00:00

Symphony X Symphony X Tool Type: Automated Peptide Synthesizer Manufacturer: Gyros Protein Technologies

syringe_pumps

Anonymous (anonymous@undisclosed.example.com) — 2020-04-03T21:42:27+00:00

New Era Syringe Pumps The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. New Era Syringe Pumps Tool Type:

taz_3_bio_printer

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T18:53:38+00:00

TAZ 6 Bio Printer Taz 6 Bio printer Tool Type: “3D FDM printer” Location: “who knows

test_tool

Anonymous (anonymous@undisclosed.example.com) — 2020-08-11T17:15:44+00:00

This is a test tool for experimentation

texture_analyzer

Anonymous (anonymous@undisclosed.example.com) — 2024-10-11T20:02:13+00:00

Texture Analyzer Texture Analyzer Tool Type: Mechanical Properties Characterization Location: Elings Hall 2411

texture_technologies_texture_analyzer

Anonymous (anonymous@undisclosed.example.com) — 2021-06-22T19:11:10+00:00

Texture Analyzer Texture Analyzer Tool Type: “Indenter” Location: “Elings Hall 2436” Supervisor

thermal_camera

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:37:13+00:00

Thermal Camera Tool Type: “” Location: “” Supervisor

thermoline_furnace

Anonymous (anonymous@undisclosed.example.com) — 2020-08-05T03:11:52+00:00

Thermoline 1315M Furnace The following is a sample image that can be inserted by clicking on the small picture frame icon in the edit bar. Thermoline 1315M Furnace Tool Type: “TEXT HERE

thinky_mixer

Anonymous (anonymous@undisclosed.example.com) — 2020-08-04T02:47:29+00:00

Thinky ARE-310 Mixer Thinky ARE-310 Mixer Tool Type: “TEXT HERE” Location: “TEXT HERE”

tools

Anonymous (anonymous@undisclosed.example.com) — 2015-10-20T04:05:51+00:00

CNSI Microfluidics Lab Tools PDMS Processing * Laurell WS-650M Spin Coater * Thinky ARE-310 Mixer Surface Treatement * Novascan Ozone cleaner * Electro-Technic BD-20AC Corona Treater * Vapor deposition chamber Inspection and Testing *

tool_template

Anonymous (anonymous@undisclosed.example.com) — 2015-10-22T03:34:05+00:00

Tool Name ---------- Description ---------- Safety ---------- References ---------- Process information

trimsaw2sop

Anonymous (anonymous@undisclosed.example.com) — 2020-11-03T17:46:43+00:00

Dimond TrimSaw 2 Training SOP Last edited: Furst (10/30/20) Instructor: Date: Attendees: Name Group or Company Signature123456 ---------- Overview: * This training provides an introduction to using and operating the TrimSaw 2 diamond cutting saw including:

trotec_speedy

Anonymous (anonymous@undisclosed.example.com) — 2020-10-23T16:45:01+00:00

Trotec Speedy 100 Trotec Speedy 100 Tool Type: “Laser Cutter” Location: “Microfluidics lab”

ultimaker3_extended

Anonymous (anonymous@undisclosed.example.com) — 2020-11-04T01:06:17+00:00

Ultimaker3 Extended Dual FDM 3D Printer Ultimaker3 Extended Dual FDM 3D Printer Tool Type: “FDM 3D printer”

ultimaker_3_quick_review

Anonymous (anonymous@undisclosed.example.com) — 2020-08-18T18:48:00+00:00

Ultimaker 3 Extended Tool Lead: Andrew Furst Contact: Andrewfurst@ucsb.edu Safety Concerns * Both print heads and bed are heated during operation. Do not attempt to clean, remove, or adjust without allowing for adequate cool down time. * Keep hands clear of printer during operation. Pause print before clearing or adjusting print.

ultimaker_3_sop

Anonymous (anonymous@undisclosed.example.com) — 2021-04-27T17:40:14+00:00

FDM Training SOP Last edited: Furst (08/26/20) Instructor: Date: Attendees: Name (Last, First) Group or Company Signature (First, Last)123456 ---------- Overview: * This training provides an introduction to using and operating the FDM 3D printers including:

ultrasonic_cleaner

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T17:37:45+00:00

Ultrasonic Cleaner Tool Type: “” Location: “” Supervisor

uv_led_plate

Anonymous (anonymous@undisclosed.example.com) — 2024-10-09T23:10:20+00:00

LED plate Lumidox II Tool Type: “LED 96 plate” Location: “Elings Hall 2411” Supervisor Tool Lead

vacuum_oven

Anonymous (anonymous@undisclosed.example.com) — 2020-10-02T19:09:47+00:00

Vacuum Oven Vacuum Oven Tool Type: “Vacuum Oven” Location: “Microfluidics Lab”

vacuum_ovens

Anonymous (anonymous@undisclosed.example.com) — 2024-10-16T19:18:00+00:00

Vacuum Ovens Fisherbrand Vacuum Ovens and Cold Trap Tool Type: Material Processing, Drying, Annealing Manufacturer: Fisherbrand Oven and Welch Vacuum Pump

vapor_silanation_rig

Anonymous (anonymous@undisclosed.example.com) — 2020-07-16T16:39:20+00:00

Vapor Silanation Rig PRIMO Tool Type: “Vacuum deposition chamber” Location: “Microfluidics Lab

vapourtec_flow_chemistry_system

Anonymous (anonymous@undisclosed.example.com) — 2024-10-16T20:08:21+00:00

Vapourtec Flow Chemistry System RS-400 with Fraction Collector Tool Type: Scalable synthesis Manufacturer: Vapourtec

visiting_ucla_campus

Anonymous (anonymous@undisclosed.example.com) — 2026-02-07T02:30:01+00:00

INFORMATION FOR VISITING BioPACIFIC MIP AT UCLA LOCATION BioPACIFIC MIP facilities are located at the CNSI building on the UCLA campus. HOW TO GET TO CNSI Northbound to UCLA (LAX to UCLA) 405 North Exit Wilshire Blvd East and follow the road to the right and stay on the far left lane Left on Westwood Blvd and go straight up into campus, where it will change into Westwood Plaza Southbound to UCLA

visiting_ucsb_campus

Anonymous (anonymous@undisclosed.example.com) — 2026-02-07T02:06:19+00:00

INFORMATION FOR VISITING BioPACIFIC MIP AT UCSB LOCATION BioPACIFIC MIP SAXS and microrheology facilities are located in Elings Hall on UCSB campus. All other BioPACIFIC MIP facilities are located at OASIS, 71 S Los Carneros Rd, Goleta, CA 93117 (Apeel Sciences Building on google)

vr211_camera

Anonymous (anonymous@undisclosed.example.com) — 2020-07-16T16:49:45+00:00

Phantom VR211 High Speed Camera Tool Type: “Camera” Location: “Microfluidics Lab” Supervisor

wen_drill_press

Anonymous (anonymous@undisclosed.example.com) — 2020-10-08T16:41:51+00:00

WEN vertical Drill Press WEN vertical Drill Press Tool Type: “Vertical Milling Machine” Location: “Innovations Workshop

whatprintershouldiuse

Anonymous (anonymous@undisclosed.example.com) — 2021-01-22T19:50:31+00:00

Which 3D Printer is Best for my part? Depending on the geometry of a part, its application, and its environment a particular 3D printer or material may be desirable to use due to its properties. While many different printers may work for a particular job, selecting the wrong printer may lead to drastically overpaying or overbuilding a part for its application. On the other hand using the wrong printer and material could lead to part warping due to moisture after instillation, or even print fail…

workshop_covid_information

Anonymous (anonymous@undisclosed.example.com) — 2021-06-20T19:49:48+00:00

BioPACIFIC MIP Laboratories COVID-19 Scheduling Information Recent announcements * BioPACIFIC MIP Laboratories COVID-19 Scheduling Information Overview: Work in Elings Hall under the Campus’ COVID Phase 4 guidelines will be much different than they were before the shutdown. Research will ramp-up slowly so that we can be certain that the work environment is as safe as possible. Some of the most significant changes:

workshop_wizards_handouts

Anonymous (anonymous@undisclosed.example.com) — 2020-08-31T18:46:33+00:00

Handouts For Training [Lab Orientation Sign In] [Laser Cutter Training Outline] [Laurel Spin Coater Training Checklist] [Objet sign in and outline]

workshop_wizard_handbook

Anonymous (anonymous@undisclosed.example.com) — 2021-01-22T18:36:30+00:00

Workshop Wizard Handbook Microfluidics Lab Routine Maintenance Chores: 1. Check and replenish paper towels in dispensers * Paper towels are stocked in brown paper packages on the shelves along the wall by the entrance. * There are 2 paper towel dispensers in the lab, just turn the key to check how much there are.

xytornix_soldering_station

Anonymous (anonymous@undisclosed.example.com) — 2020-07-09T19:14:03+00:00

Xytronic LF-853D soldering station Xytronic LF-853D soldering station Tool Type: “soldering iron / rework station ” Location:

yamamoto_constant_temperature_oven_dkn602c

Anonymous (anonymous@undisclosed.example.com) — 2024-10-13T21:36:25+00:00

Force Convection Oven Yamamoto Constant Temperature Oven DKN602C Tool Type: Force Convection Constant Temperature Oven Location: Elings 2436