Differences

This shows you the differences between two versions of the page.

--- diamond_saw [2020/10/02 18:14] – furst
+++ diamond_saw [2020/11/03 17:50] (current) – [Reference Documentation] furst
@@ Line 19: / Line 19: @@
 ===== About =====
+The Trimsaw 2 is a saw designed for rapid sectioning of printed circuit boards, ceramic substrates and other abrasive non metals. Contains a built in reservoir which can be used to feed lubrication directly to the blade.
 ----
 =====Training=====
+[[trimsaw2SOP]]
@@ Line 30: / Line 30: @@
 ===== Detailed Specifications =====
+Motor power: .25 HP
+Speed range: 500-3000 RPM by 100 RPM increments
+Cutting platform: 6.75" x 12.5"
+Blade size: 4"-6"
 -----
 ===== Safety Concerns =====
+  * Keep hands clear of blade when machine is on
+  * Use only approved blades and do not cut metals with  sectioning blades
+  * Use coolant or lubrication when making cuts
+  * Use fixtures and guides whenever possible to reduce risk of slipping into the blade
 ----
@@ Line 41: / Line 46: @@
 ===== Reference Documentation =====
+  * [[http://consumables.alliedhightech.com/Sectioning-s/1818.htm|Allied blade catalog]]
+  * [[https://www.ukam.com/|UKAM Industrial Superhard Tools]]
+  * {{ :wiki:msds:kool_mist_78_msds.pdf |Kool Mist MSDS}}