NSF BioPACIFIC MIP Wiki

A National User Facility Dedicated to Biomaterials

User Tools

Site Tools


diamond_saw

Diamond Saw

Diamond Saw
Tool Type: “Cutting Tool”
Location: “Microfluidics Lab”
Supervisor Tool Lead
David Bothman
(805) 893-4125
bothman@cnsi.ucsb.edu
Description: “Trim Saw 2”
Manufacturer: “Allied”

About

The Trimsaw 2 is a saw designed for rapid sectioning of printed circuit boards, ceramic substrates and other abrasive non metals. Contains a built in reservoir which can be used to feed lubrication directly to the blade.


Training

Detailed Specifications

Motor power: .25 HP Speed range: 500-3000 RPM by 100 RPM increments Cutting platform: 6.75“ x 12.5” Blade size: 4“-6”


Safety Concerns

  • Keep hands clear of blade when machine is on
  • Use only approved blades and do not cut metals with sectioning blades
  • Use coolant or lubrication when making cuts
  • Use fixtures and guides whenever possible to reduce risk of slipping into the blade

Reference Documentation

diamond_saw.txt · Last modified: 2020/11/03 17:50 by furst