Differences

This shows you the differences between two versions of the page.

--- genevac_ez2_4.0_benchtop_evaporator [2024/10/14 21:51] – [Detailed Specifications] mbates
+++ genevac_ez2_4.0_benchtop_evaporator [2024/10/21 18:20] (current) – mbates
@@ Line 15: / Line 15: @@
 ===== About =====
-The Genevac EZ-2 4.0 Elite is a high-performance evaporator system designed to efficiently remove solvents from samples through evaporation. It uses advanced vacuum and centrifugal technology to evaporate a wide range of solvents, including volatile organic compounds and aqueous solutions, without overheating or degrading sensitive samples.
+The Genevac EZ-2 4.0 Elite is a high-performance parallel evaporator system designed to efficiently remove solvents from samples through evaporation. It uses advanced vacuum and centrifugal technology to evaporate a wide range of solvents, including volatile organic compounds and aqueous solutions, without overheating or degrading sensitive samples. The EZ-2 Elite features a dry scroll pump and is optimized for removal of even the highest boiling point solvents (> 165 °C), such as DMSO and NMP.
 ----
-===== Detailed Specifications =====
+===== Solvent Guidelines and Sample Holder Options =====
-**Solvent Compatability:** SP Genevac evaporators are robust systems designed to be resistant to the most common solvents and acids used within the chemistry laboratory, including TFA and HCl.
+**Solvent Compatibility** \\
-concentration.\\
-**Container Compatibility:** \\
+SP Genevac evaporators are robust systems designed to be resistant to the most common solvents and acids used within the chemistry laboratory, including TFA and HCl. **However, the Genevac is not compatible with the following:**\\
-• 40-, 30-, 20-, and 8-mL vials
-• 16-, 18-, and 25-mm diameter and 150 mm length test tubes
-• 50-mL centrifuge tubes
-----
+• Carbon disulfide\\
+• Diethyl ether\\
+• 1,2-Dimethoxyethane\\
+• 2-Ethoxyethanol\\
+• Hydrogen cyanide\\
+• Pentane\\
+• Triethylsilane\\
-===== Safety Concerns =====
+**Sample formats**
-**The Genevac is not compatible with the following solvents:**\\
+Sample holders for the following formats are available:\\
-• Carbon disulfide \\
+• **Vials:** 40, 30, 20, and 8-mL sizes \\
-• Diethyl ether \\
+• **Test tubes:** 16, 18, and 25-mm diameter and up to 150 mm length \\
-• 1,2-Dimethoxyethane \\
+• **Centrifuge tubes:** 50-mL size
-• 2-Ethoxyethanol \\
-• Hydrogen cyanide \\
-• Pentane \\
-• Triethylsilane \\
-Properly dispose of solvents collected in the waste reservior once the evaporative run is complete.
+----
-----
 ===== Reference Documentation =====
-{{ :biotagev10touchmanual.pdf |V-10 User Manual}}
+{{ :EZ2Manual.pdf | Installation and Maintenance Manual}}
 -----