Differences

This shows you the differences between two versions of the page.

--- miicraft_50_sop [2020/08/17 17:26] – [Accident Response] furst
+++ miicraft_50_sop [2020/08/17 17:44] (current) – [Accident Response] furst
@@ Line 73: / Line 73: @@
 ====Accident Response====
 **Accident:** A user leaves a build tray or foreign object inside the printer when starting a
-print.//
+print. \\
 **Printer Response:** A mechanical error warning displays on screen. Printer is not responsive to
-computer commands and requires a hard reboot//
+computer commands and requires a hard reboot \\
 **Solution:**
   - Press and hold power button for 2 seconds, then release.
@@ Line 82: / Line 82: @@
   - Remove obstructions and refresh computer connection in MiiController Window
-**Accident:** Scratching glass projection plate or Teflon surface of the resin tank//
+**Accident:** Scratching glass projection plate or Teflon surface of the resin tank \\
-**Printer Response:** Print Quality is poor//
+**Printer Response:** Print Quality is poor \\
 **Solution:**
   - Replace build tank
-**Accident:** Build tray is not installed
+**Accident:** Build tray is not installed \\
-**Printer Response:** New prints will not start, build platform stand immersed in resin.
+**Printer Response:** New prints will not start, build platform stand immersed in resin. \\
 **Solution:**
-**Accident:** Chemical spill of IPA or toxic resin
+**Accident:** Chemical spill of IPA or toxic resin \\
 **Solution:**
+====References====
+{{ :tools:miicraft50:miicraft125_manual_printerv1.5.pdf |MiiCraft Manual}} \\
+{{ :tools:miicraft50:miicraft_calibration_data.pdf |MiiCraft Calibration Data}} \\
+{{ :tools:miicraft50:resinworks3d_msds.pdf |ResinWorks MSDS}} \\
+{{ :tools:miicraft50:transferring_the_resin_sop.pdf | Transferring Resin SOP}} \\
+{{ :tools:miicraft50:ucsb-iw_miicraft_50_operating_checklist.pdf |Operations Checklist}}