Differences

This shows you the differences between two versions of the page.

--- ultimaker3_extended [2020/08/18 17:38] – [Training] furst
+++ ultimaker3_extended [2020/11/04 01:06] (current) – [Detailed Specifications] dave
@@ Line 25: / Line 25: @@
 =====Training=====
 [[Ultimaker 3 SOP|FDM Printer SOP]]\\
-[[Ultimaker 3 Quick Review]]
 -----
 ===== Detailed Specifications =====
-Build Volume: 215 x 215 x 300 mm \\
+  *Build Volume: 215 x 215 x 300 mm \\
-Filament diameter: 2.85 mm\\
+  *Filament diameter: 2.85 mm\\
-layer resolution: 60 to 600 microns depending on print head (see Specifications documentation  page 11)\\
+  *layer resolution: 60 to 600 microns depending on print head (see Specifications documentation  page 11)\\
-XYZ accuracy: 12.5, 12.5, 2.5 microns \\
+  *XYZ accuracy: 12.5, 12.5, 2.5 microns \\
-Build plate temperature: 20-100 °C\\
+  *Build plate temperature: 20-100 °C\\
-Nozzle temperature: 80 - 100 °C\\
+  *Nozzle temperature: up to 210 °C\\
-----
+-----
 ===== Safety Concerns =====
-Insert Text Here!
+  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
+  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
+  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, Gloves, and a face shield must be warn when inserting and removing parts or basket from the  tank.
 ----
@@ Line 63: / Line 68: @@
 [[https://support.ultimaker.com/hc/en-us/articles/360012007119]]\\
 {{:tools:ultimaker3:pva_drying_recipe.pdf|}}\\
-{{:tools:ultimaker3:ultimaker_filaments_-_sheet1.pdf|}}
+{{:tools:ultimaker3:ultimaker_filaments_-_sheet1.pdf|}} \\
+{{:tools:ultimaker3:failed_3d_print_procedure.pdf|}}
+-----
-===== Training Documentation =====
-[[Ultimaker 3 SOP|FDM Printer SOP]]\\
-{{:tools:ultimaker3:failed_3d_print_procedure.pdf|}}
-----