The Ultimaker 3 extended is a filament fed fusion deposition 3D printer capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.

FDM Printer SOP
Ultimaker 3 Quick Review

Build Volume: 215 x 215 x 300 mm
Filament diameter: 2.85 mm
layer resolution: 60 to 600 microns depending on print head (see Specifications documentation page 11)
XYZ accuracy: 12.5, 12.5, 2.5 microns
Build plate temperature: 20-100 °C
Nozzle temperature: 80 - 100 °C

Insert Text Here!

PVA Temps
Extruder: 220 C Bed: Whatever structural filament recommends

ABS Temps
Extruder: 230 C Bed: 100 C

quick_start_guide_ultimaker_3_v3.2.pdf
ultimaker_3_extended_specifications.pdf
um180129_ultimaker_3_manual_rb_v12_english.pdf
https://support.ultimaker.com/hc/en-us/articles/360012007119
pva_drying_recipe.pdf
ultimaker_filaments_-_sheet1.pdf

FDM Printer SOP
failed_3d_print_procedure.pdf