inverted_microscope
This is an old revision of the document!
Table of Contents
Zeiss Inverted Microscope
| Mono1 Printer |
|---|
 |
| Tool Type: “Inverted Microscope” |
| Location: “Elings Hall 2411” |
| Supervisor | Tool Lead |
| Juan Manuel Urueña | “WW Name” |
| jmuruena@ucsb.edu | “WW Email” |
| Description: “Inverted Microscope” |
| Manufacturer: “Zeiss” |
About
Inverted microscope Axio Observer 7 ACR for transmitted-light brightfield LED, phase contrast, differential interference contrast, fluorescence with Colibri 7; equipped with ACR function, Scanning Stage STEP and Docking station
Detailed Specifications
Safety Concerns
Read the manufactures manual before first use. If the Mono 1 printer acts in a way that is not described by the manual, turn off the printer and contact monoPRINTER.
- Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury
- Never clean or service the printer while it is on
- The printer uses UV light for curing. Never look directly at UV light nor expose skin. Serious injury may result from exposure
- Always ensure that equipment is correctly mounted before use. Improperly mounted print beds, build platfomrs can be dangerous. If any equipment appears damaged, turn off the printer, unplug all connections and contact monoPRINTER.
Operating Procedures
Insert Text Here!
Reference Documentation
Training Documentation
inverted_microscope.1627068855.txt.gz · Last modified: 2021/07/23 19:34 by jmuruena