This is an old revision of the document!
Table of Contents
Mono3VZ2 - High Power 365 nm and 465 nm
| Mono3MZ2 |
|---|
|
| Tool Type: High power printer |
| Location: Oasys 400 |
| Manufacturer: MonoPrinter |
| Principal Scientist |
| Juan Manuel Urueña |
| jmuruena@ucsb.edu |
About
The MONO3-VZ by MonoPrinter is a research-grade, high-intensity DLP (Digital Light Processing) 3D printer designed for extreme customization and advanced material science applications.
Unlike consumer resin printers that use a single UV wavelength, the VZ series has two high power LEDs 365 nm and 465 nm that can be used sequentially.
Detailed Specifications
| LED intensity |
|---|
Manuals
MonoWare Job File
Structure
MONO3Z2 (2CH) Initial Assembly & Alignment
MONO3Z4 (4CH) Initial Assembly & Alignment
MONO3Z Series Printer Firmware
Mono3Z First Printing
MONO3Z2 LED Swapping
MONO3Z4 (4CH) Printing File
MONO3Z2 (2CH) Wiper & Heater
Safety Concerns
Read the manufactures manual before first use. If the Mono3Z2 acts in a way that is not described by the manual, turn off the printer and contact the principal scientist as well as Mono at info@monoprinter.com .
- Never place your finger near the machine until all parts have stopped moving. Moving parts can cause serious injury.
- Never clean or service the printer while it is on.
- The printer uses different LEDS. Never look directly at LED light nor expose skin. Serious injury may result from exposure.
- Disassembling the printer may cause an electric shock or damage to the instrument. Do not disassemble any parts of the printer not mentioned in the instruction manual.