formcure_uv
This is an old revision of the document!
−Table of Contents
FormCure UV Curing Station
| FormCure UV Curing Station |
|---|
 |
| Tool Type: “UV Curing Station” |
| Location: “Innovations Worship” |
| Supervisor | Tool Lead |
| David Bothman | “WW Name” |
| (805) 893-4125 | (###) ###-#### |
| bothman@cnsi.ucsb.edu | “WW Email” |
| Description: “FormLabs Curing Station” |
| Manufacturer: “FormLabs” |
About
Some FormLabs Resins used in the Form 2 3D printer can benefit from post process curing. Each resin has a specific hardening curve which can be found within the reference material which will indicate the ideal time and temperature to be set on the FormCure.
Detailed Specifications
Insert Text Here!
Safety Concerns
Insert Text Here!
Operating Procedures
Insert Text Here!
Reference Documentation
https://support.formlabs.com/s/article/Using-Form-Cure?language=en_US
https://support.formlabs.com/s/article/Form-Cure-Time-and-Temperature-Settings?language=en_US
https://support.formlabs.com/s/article/Form-Cure-Time-and-Temperature-Settings?language=en_US
Training Documentation
Insert Text Here!
formcure_uv.1595524739.txt.gz · Last modified: 2020/07/23 17:18 by furst