laser_cutting_data
This is an old revision of the document!
Table of Contents
CNSI Microfluidics Laser Cutting Data
Material Vendors
Acrylic sheet, optically clear, from McMaster Carr: part number 8560K239
http://www.mcmaster.com/#catalog/119/3558/=molz4w
Cutting Parameters
Acrylic Sheet
Cutting 1/8”, 100% power, 0.4 ipm, 2000 Hz, (Dave Bothman, 5/5/13 - clean cut)
Cutting 1/4”, 100% power, 0.15 ipm, 1000 Hz, z offset -.125, (Dave Bothman, 5/5/13 - clean cut)
PDMS
250um PDMS with mylar backing on back side and removed from front
Cutting 42% power, 2.0 1ps, 5000Hz (Peter Mage, 5/9/13 - some flash and soot - recipe needs to be refined)
Double Sticky Tape
25% power, 3 ips
laser_cutting_data.1368203885.txt.gz · Last modified: 2013/05/10 16:38 by dave