sca_naoh_bath
This is an old revision of the document!
Table of Contents
SCA 1200 HT NaOH parts bath
| SCA 1200 HT NaOH parts bath |
|---|
 |
| Tool Type: “3D print support Dissolve” |
| Location: “TEXT HERE” |
| Supervisor | Tool Lead |
| David Bothman | “WW Name” |
| (805) 893-4125 | (###) ###-#### |
| bothman@cnsi.ucsb.edu | “WW Email” |
| Description: “Dissolves support filament for F270” |
| Manufacturer: “PADT” |
About
This tool is used to dissolve the support filament printed by the F270 FDM 3D printer. Using a heated solvent, parts can be loaded into the main bucket or suspended in a smaller cage during the support removal process.
Detailed Specifications
Insert Text Here!
Safety Concerns
This tool makes use of a heated solvent! A lab coat, face shield, and nitrile gloves must be wore by the user whenever the SCA 1200 HT is to be opened to protect for solution and vapor fumes. In case of contact with solution flush eyes, and skin with water, remove all contaminated clothing, and get medical attention immediately. See SDS below.
Operating Procedures
Insert Text Here!
Reference Documentation
Training Documentation
Insert Text Here!
sca_naoh_bath.1594318984.txt.gz · Last modified: 2020/07/09 18:23 by furst