This is an old revision of the document!
Table of Contents
Ultimaker3 Extended Dual FDM 3D Printer
| Ultimaker3 Extended Dual FDM 3D Printer |
|---|
| Tool Type: “FDM 3D printer” |
| Location: “CNSI Innovations Workshop” |
| Supervisor | Tool Lead |
| David Bothman | Andrew Furst |
| (805) 893-4125 | (801) 928-8869 |
| bothman@cnsi.ucsb.edu | Andrewfurst@ucsb.edu |
| Description: “FDM 3D Printer” |
| Manufacturer: “Ultimaker” |
About
The Ultimaker 3 extended is a filament fed fusion deposition 3D printer capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.
Training
Detailed Specifications
Build Volume: 215 x 215 x 300 mm
Filament diameter: 2.85 mm
layer resolution: 60 to 600 microns depending on print head (see Specifications documentation page 11)
XYZ accuracy: 12.5, 12.5, 2.5 microns
Build plate temperature: 20-100 °C
Nozzle temperature: 80 - 100 °C
Safety Concerns
Insert Text Here!
Reference Documentation
PVA Temps
Extruder: 220 C
Bed: Whatever structural filament recommends
ABS Temps
Extruder: 230 C
Bed: 100 C
quick_start_guide_ultimaker_3_v3.2.pdf
ultimaker_3_extended_specifications.pdf
um180129_ultimaker_3_manual_rb_v12_english.pdf
https://support.ultimaker.com/hc/en-us/articles/360012007119
pva_drying_recipe.pdf
ultimaker_filaments_-_sheet1.pdf
failed_3d_print_procedure.pdf